|
|
Post by bestill on Jul 8, 2015 17:13:44 GMT -5
I just ran across dss custom encore pushing275 be at 3000 fps .
I understand they are rebarreled encore with krieger barrel but to me that seems extreme for encore with scope rail drilled in the top of chamber and .990 o.d barrel
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 8, 2015 17:32:56 GMT -5
I would not want to pull the trigger on it with that load.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 8, 2015 20:02:40 GMT -5
pretty stout load for sure from an Encore barrel, custom or not..
|
|
|
|
Post by gar on Jul 9, 2015 6:26:37 GMT -5
Don't know of anyone with Justin's rifle but he has been building these for a while as well as the 700 conversions. Rich Franklin also mentioned Justin on his website when he was about to retire a few years ago so I'm thinking they are decent guns.
|
|
homebrook
Spike
THIS MESSAGE BOARD IS SECOND TO NONE------ MORE GOOD INFO THAN U CAN SHAKE A STICK AT THANKS
Posts: 43 
|
Post by homebrook on Jul 12, 2015 21:28:49 GMT -5
I would like to here all about this encore pushing a Parker 275 be to 3000 fps. This sounds like pardon my English ( BULL }
Sent DSS two posts and did not here anything back so I ignored their add . If anyone knows anything about this Encore setup or this company please reply DSS CUSTOM ENCORE
THANK YOU
HOMEBROOK
|
|
|
|
Post by 12ptdroptine on Jul 12, 2015 21:58:11 GMT -5
There is a member here. Kralik4jr I belive who used to push a 275 mh with 70 gn of H4198 in an Encore with a Pacnor barrel IIRC.....but dont go there on my word... RESEARCH it very carefully
Drop
|
|
homebrook
Spike
THIS MESSAGE BOARD IS SECOND TO NONE------ MORE GOOD INFO THAN U CAN SHAKE A STICK AT THANKS
Posts: 43
|
Post by homebrook on Jul 12, 2015 22:25:51 GMT -5
thankyou for the quick response i want to be double sure before i go over 62 gr. of IMR 4198 ANYONE ELSE OUT TRERE
THANKS AGAIN HOMEBROOK
|
|
alex
8 Pointer
Posts: 116
|
Post by alex on Jul 12, 2015 23:01:28 GMT -5
|
|
|
|
Post by bestill on Jul 13, 2015 6:21:20 GMT -5
I think those loads in a .990 barrel are really pushing the safe factor.
Please be safe .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 13, 2015 7:38:55 GMT -5
I think those loads in a .990 barrel are really pushing the safe factor. Please be safe . We've gone over this many times... That is an opinion... The Savage barrels are 1.06" at the shank, and they've held up to everything I've thrown at it with my .416 loads. If you are worried about pressures use IMR 3031. It will create lower pressures and higher velocities. Check the Pressure Trace section for all load inquiries. |
|
|
|
Post by bestill on Jul 13, 2015 7:55:09 GMT -5
Yes just opinion i missed out on older discussion on this subject.
Seems the 1.060 shank is also screwed in a reciever and doesn't have scope holes drilled in the top.
Thanks for info just learning and thinking safety.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 13, 2015 8:13:11 GMT -5
Yes just opinion i missed out on older discussion on this subject. Not really. Search function shows otherwise. |
|
|
|
Post by marku on Jul 13, 2015 20:50:47 GMT -5
I own one. It'll push a 270 emax at 300 fps no issues. Plus it's pretty accurate lol. Mines a 1-20 kreiger. I've shot some pretty d**n good groups with it. 100 it'll shoot clover leafs if I do my part. I think my best at 400 yards was 3.5"
No worries hid guns are legit.
|
|
wayne
Button Buck
Posts: 1
|
Post by wayne on Jul 17, 2015 16:16:03 GMT -5
I am about to order from dss and wondering about having Justin weld a rail on. Would make a rock solid scope base and no drilled holes. I'm sure he has to weld the encore lug on already. As long as it's perfectly straight as the lug must be I can see no down side.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2015 17:22:43 GMT -5
I am about to order from dss and wondering about having Justin weld a rail on. Would make a rock solid scope base and no drilled holes. I'm sure he has to weld the encore lug on already. As long as it's perfectly straight as the lug must be I can see no down side. Sounds great! kralik4jr, has built several SMLs on the Encore frame. send him a PM with your questions. |
|
|
|
Post by edge on Jul 17, 2015 17:59:39 GMT -5
I don't see a load listed so 3k with a 275 grain bullet tells nothing about pressure...other than a guess.
edge.
|
|
|
|
Post by Dave W on Jul 18, 2015 9:19:54 GMT -5
|
|
homebrook
Spike
THIS MESSAGE BOARD IS SECOND TO NONE------ MORE GOOD INFO THAN U CAN SHAKE A STICK AT THANKS
Posts: 43
|
Post by homebrook on Jul 19, 2015 15:48:47 GMT -5
forkhorn i would like to hear about your gun and load you use to shoot a emax to 3000 fps id like to go there homebrook
|
|
|
|
Post by Cheytac on Jul 22, 2015 6:22:39 GMT -5
I have had 3 of DSS pro hunter ML , all with 30" Krieger barrels, load was 67-68 V120, 275BE bullets. 623 documented firings with that load with no issues. However that was around MAX. Velocity was around 2750-2800FPS.
|
|
