|
|
Post by pposey on May 19, 2011 8:56:01 GMT -5
|
|
|
|
Post by rossman40 on May 19, 2011 9:20:16 GMT -5
A little heavy but very usable if you access to a lathe. Why do deals like this pop-up when there is no mad money funds?....
|
|
|
|
Post by hoz on May 19, 2011 10:08:47 GMT -5
Murphy's law Rossman. I had to pass up a great deal on a scope last night for the same reason. Mad money account needs some time to rebuild
|
|
|
|
Post by Jon on May 19, 2011 14:20:14 GMT -5
Montana rifleman I assuming is the manufacturer. I have not had anything to do with them are they on par with say a PN? Price is good it is tempting.
Jon
|
|
|
|
Post by rossman40 on May 20, 2011 0:05:35 GMT -5
From what I remember it is a family business and they were button rifling their own barrels. I think the one that runs the barrel side is Brian. A friend dealt with them some a few years ago and it seemed the only guy that knew anything was Brian. Anyone else seemed dumber then a box of rocks.
|
|
|
|
Post by Jon on May 20, 2011 4:46:04 GMT -5
Rossman40. Thank you for the input. The barrel is tempting. It is the right specs for what I was thinking about doing except for the .400/.408. With the work people are doing trying to come up with a good 40cal. bullet I was thinking about a .392/.400 barrel so I could go full form die.
Jon
|
|
|
|
Post by wilmsmeyer on May 20, 2011 5:10:28 GMT -5
Should this be on the buy/sell link or are components not considered weapons? Just asking......
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 20, 2011 6:52:56 GMT -5
Ask proboards!!! They are the ones that screwed up the buy, sell
section. You better move it, some idiot might think of the barrel as a weapon.
|
|
|
|
Post by pposey on May 20, 2011 8:24:59 GMT -5
Sorry didn't think of that when I posted the link....
|
|
|
|
Post by rossman40 on May 20, 2011 13:40:30 GMT -5
Let me get to my judge chair,,,, We are not the ones posting the for sale item, we are just referencing via link.
|
|
|
|
Post by rangeball on May 20, 2011 13:47:58 GMT -5
Al has a .40 Montana barrel, I believe he said it was a great shooter. I have one for my .45 project that is nearing completion. We snagged ours on a close out sale, $70 each contoured and rifled to our pleasure  |
|
|
|
Post by Dave W on May 20, 2011 14:55:16 GMT -5
Al has a .40 Montana barrel, I believe he said it was a great shooter. I have one for my .45 project that is nearing completion. We snagged ours on a close out sale, $70 each contoured and rifled to our pleasure He has had to do some bullet mods to get a good fit. IIRC it was a very loose bore. It is boring accurate though. |
|
|
|
Post by rangeball on May 20, 2011 15:00:33 GMT -5
I believe he knew that going in. I think the only one they had on closeout was a .403. He bought it knowing sizing wouldn't be an issue for him. My barrel is right on spec I believe.
|
|
