|
Post by jeff on Feb 21, 2011 21:56:54 GMT -5
What is the low and top end of H4198 loads with the 195 Barnes in the 45 pacnor that some of you guys have settled on? Thanks,Jeff~ Everything is laying on the bench waiting on a barrel due anyday.
4x16x50 Nikon Monarch 3rd pillard savage SS action Laminate stock/Pachmyer shoulder pad Sharpshooter recoil lug solid aluminum ram rod SS thimble to be attached 150-195 gr Barnes light blue sabots // 2#- H4198 Weaver steel bases and rings Brownell's bedding glass
|
|
|
Post by fishhawk on Feb 21, 2011 22:08:54 GMT -5
I don't know the lowest end, but most are using 58-63gr.
|
|
|
Post by jray57 on Feb 22, 2011 5:54:53 GMT -5
I'm feel your pain! Ordered mine late Nov and still waiting.
|
|
|
Post by pposey on Feb 22, 2011 8:20:29 GMT -5
54-58 grains have worked well for me
|
|
|
Post by dannoboone on Feb 22, 2011 19:14:58 GMT -5
?? "150-195 gr Barnes" ??
Did you find some of the 150gr Barnes somewhere??
|
|
|
Post by jeff on Feb 22, 2011 19:30:10 GMT -5
No 150 quanity
|
|
|
Post by Richard on Feb 22, 2011 20:09:21 GMT -5
Jeff..........I think I have been up as high as 65 gr. and as low as 54. That is not to say you might not go higher? (I just have not) and too low "might" give some ignition problems in cold weather and unless the load was for a "juvenile", I can't see why? If you have been following the board, 62 to 64 is about the right range for good velocity + accuracy. Richard
|
|
|
Post by pointman on Feb 23, 2011 9:04:36 GMT -5
Richard. What kind of speed did you get with the 65 grain load? 200 sst
|
|