|
Post by pposey on Jan 15, 2011 21:31:50 GMT -5
Burrris Sig Z ring and the ring bolt head pulled through the top half of the ring on one side, all of a sudden my groups went crazzy and I started checking,,, seems it may have been drilled a little thin on that side but I have been using those rings on that scope for a fewwwww hundred shots of smokeless ML
|
|
|
Post by fishhawk on Jan 15, 2011 22:17:41 GMT -5
I've seen that on cheap aluminum rings, but not on a steel ring.
|
|
|
Post by rick59 on Jan 15, 2011 22:36:07 GMT -5
Bolt a set of Warnes on that bad boy!
|
|
|
Post by pposey on Jan 15, 2011 23:05:01 GMT -5
actually have a set of warnes that are not mounted right now,,have some on my fav centerfire as well good rings
I have 12 or so pairs of the burris sig Z rings mounted, never had this before either,,, this pair had been pounded alot on the ml2 though
|
|
|
Post by 12ptdroptine on Jan 15, 2011 23:23:08 GMT -5
Bolt a set of Warnes on that bad boy! Everytime I read that "CHOOT CHOOT CLINT" I crack up and think to myself...." THIS AINT NO BABY"....... LOL
|
|
|
Post by rick59 on Jan 15, 2011 23:35:34 GMT -5
Bolt a set of Warnes on that bad boy! Everytime I read that "CHOOT CHOOT CLINT" I crack up and think to myself...." THIS AINT NO BABY"....... LOL That's some good stuff right there........
|
|
|
Post by whyohe on Jan 16, 2011 11:11:15 GMT -5
posey, i bet if you e-mail burris or contact them and send them back you will get a new set. most likely at no charge.
|
|
|
Post by mdgroundhogger on Jan 16, 2011 11:24:14 GMT -5
I work at GM as a firearms salesman and Burris is known for unselfishly backing their products. Good Company. Give them a call.
|
|
|
Post by Jon on Jan 16, 2011 12:07:08 GMT -5
I'm a big sig. zee fan Let me know how it works out? Jon
|
|
|
Post by pposey on Jan 16, 2011 13:49:24 GMT -5
I have a couple scopes I need to send to them and have checked as well, I will include the messed up ring,,, heck I just need the one piece to be ready to go
|
|
|
Post by mike.dawson on Jan 16, 2011 20:41:38 GMT -5
+1 on the Warne QD, I dont use Burris any longer, the Warne rings are lot beefier
Mike
|
|
|
Post by pposey on Jan 17, 2011 8:25:32 GMT -5
Only thing I dont like about the warne QD is the winpy little screws that attatch the bases,,the threaded portion is tiny,, also the levers will poke the sheeet out of ya if you sling the gun across your back wrong or run your hand in there fast,, I "fixed" both by replacing both with a larger hex head machine bolt,,, real east drill and tap, looks better and is more secure,,,
had a modified pair of those on my go to 7mm-08 for 5-6 years,,, very nice are they and I really like the levers being gone
|
|
|
Post by jims on Jan 17, 2011 20:26:55 GMT -5
As per Jon I have started to use the Signature Z series on more scopes and have been happy to date with them.
|
|