metro
Button Buck
Posts: 12
|
Tools?
Sept 10, 2011 19:37:29 GMT -5
Post by metro on Sept 10, 2011 19:37:29 GMT -5
What do I need to pull the breech plug on my new 10ML?
I am selling my Optima Pro tomorrow then putting that 160 towards my Savage on Monday!
I should send along the breech plug tool with the gun and I would think it wouldn't work on the Savage anyway.
What do I need for the Savage?
|
|
|
Tools?
Sept 10, 2011 19:52:50 GMT -5
Post by lwh723 on Sept 10, 2011 19:52:50 GMT -5
I think it's a 7/16" socket
|
|
|
Tools?
Sept 10, 2011 21:13:40 GMT -5
Post by hayman on Sept 10, 2011 21:13:40 GMT -5
Yes a 6 point 7/16" socket is what come with my gun
|
|
|
Tools?
Sept 11, 2011 7:06:44 GMT -5
Post by mike.dawson on Sept 11, 2011 7:06:44 GMT -5
5/32 drill bill to keep the primer pocket clean of primer gunk, a univeral socket adapter to be able to remove the BP without removing the bolt, I use a 1/3 dive socket tool
Mike
|
|
Deleted
Deleted Member
Posts: 0
|
Tools?
Sept 11, 2011 12:06:44 GMT -5
Post by Deleted on Sept 11, 2011 12:06:44 GMT -5
Metro, You are getting a NEW gun right ? There should be a breechplug wrench in the box. The universal wrench and drill bit Mike mentioned won't be. Did the gunshop have your gun? Greenhorn
|
|
|
Tools?
Sept 11, 2011 18:47:29 GMT -5
Post by Richard on Sept 11, 2011 18:47:29 GMT -5
Well, maybe my factory Savage breech plug is from a seperate run because I just put a 3/8" socket on it? ? NOT a 7/16 Richard
|
|
|
Tools?
Sept 12, 2011 5:29:12 GMT -5
Post by mike.dawson on Sept 12, 2011 5:29:12 GMT -5
it is 3/8 not 7/16
Mike
|
|