|
Post by midohhntr on Feb 28, 2009 15:17:35 GMT -5
Hi all, just joined this site. I acquired a stainless version 2 months ago. I have seen some of you use this powder, just wondering about pressure and what to watch for. I'm leaning toward the Barnz 250 TMZ with yellow sabot. Can't wait to use this gun next fall for deer. Shot a couple rounds with this bullet after I bought it using 4759, tight to load but accurate. Thanks.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 28, 2009 16:33:36 GMT -5
I can shoot 34gr. of 2400 with a 250 grain bullet real consistent. The down side for me is it is dirty and I only get about 1900 fps.If I load more than that accuracy goes downhill. If 4759 or n110 worked for me thats what I'd be using. Rocky
|
|
|
Post by tar12 on Feb 28, 2009 18:22:47 GMT -5
I can shoot 34gr. of 2400 with a 250 grain bullet real consistent. The down side for me is it is dirty and I only get about 1900 fps.If I load more than that accuracy goes downhill. If 4759 or n110 worked for me thats what I'd be using. Rocky Giving that Chrony a work out? ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 28, 2009 18:45:43 GMT -5
Every day I can get out of workin. ;D
|
|
|
Post by midohhntr on Feb 28, 2009 22:18:32 GMT -5
Just looking at alternatives, I use 2400 for my .357 and looking for another powder in case I can't get 4759. N110 0r N120 hard to get here, as well as AA5744. Thanks for the replies.
|
|
|
Post by sw on Mar 1, 2009 13:32:27 GMT -5
Just looking at alternatives, There are a "few" alternatives listed in Kerry B's loading data at the top of the green board.
|
|