|
Post by orionsoracle on Sept 25, 2010 7:23:58 GMT -5
Guys,I am completely stumped. I just picked up my new 10ML yesterday. This morning,I took out the breech plug,lubed the ventliner etc....cleaned it all up. Then went to adjust the Accutrigger,but when I went to reassemble,I CANNOT get the bolt back into the action. That black round piece on the bolt is hitting. For the life of me,I cannot figure this out. Please help
|
|
|
Post by Dave W on Sept 25, 2010 7:27:43 GMT -5
Sounds like the bolt needs recocked. I assume the rear action screw is still out when trying to insert the bolt?
|
|
|
Post by orionsoracle on Sept 25, 2010 7:29:01 GMT -5
Yes,the directions state to insert bolt before mounting the action/barrel back onto the stock
|
|
|
Post by orionsoracle on Sept 25, 2010 7:32:28 GMT -5
How would I recock the bolt? Funny thing is,when I removed the rear action screw and removed the bolt,I did nothing to the bolt itself besides remove it.
|
|
|
Post by Dave W on Sept 25, 2010 7:34:59 GMT -5
|
|
|
Post by orionsoracle on Sept 25, 2010 7:44:23 GMT -5
my bolt looks different. The notch on the handle is not lined up with the black round piece. It is in the wider position on the bolt
|
|
|
Post by Dave W on Sept 25, 2010 7:49:35 GMT -5
Is the firing pin sticking out the small hole in the end of the bolt? If so, the bolt needs recocked.
|
|
|
Post by orionsoracle on Sept 25, 2010 7:50:55 GMT -5
it looks to be sticking out a little bit
|
|
|
Post by orionsoracle on Sept 25, 2010 7:52:55 GMT -5
so I should pry up on the black round pice to get it into the higher position?
|
|
|
Post by Dave W on Sept 25, 2010 7:58:35 GMT -5
Rossman shows in the pics how to recock. I do the same thing he illustrated. Put the black round cocking piece pin on the edge of the work bench and push down while twisting it into the recocked position which would be in the narrow portion of the slot towards the bottom of the bolt.
|
|
|
Post by orionsoracle on Sept 25, 2010 8:03:37 GMT -5
I got it Dave,thanks SO MUCH!!! Dont know how it got that way,but I learned something this early. Thanks again
|
|
|
Post by Dave W on Sept 25, 2010 8:05:42 GMT -5
I got it Dave,thanks SO MUCH!!! Dont know how it got that way,but I learned something this early. Thanks again Glad to have helped and glad it was something simple.
|
|