|
Post by dxt20 on Feb 5, 2010 16:20:55 GMT -5
i have seen on some reloading data sites that there are 90 grain .224 diameter bullets. i know that is an extremely heavy bullet for any 22 caliber rifle. but has anyone heard of these and who manufactures them? thank you
|
|
|
Post by whelenman on Feb 5, 2010 19:16:22 GMT -5
|
|
|
Post by dxt20 on Feb 5, 2010 23:09:38 GMT -5
does anyone know where you can purchase these bullets?
|
|
|
Post by mike3132 on Feb 5, 2010 23:30:08 GMT -5
|
|
|
Post by whelenman on Feb 6, 2010 7:33:58 GMT -5
Yeah, in the article I found they were using a 1-6.5 twist. Those are some long slim bullets. I thought the 69 gr. Sierras I used were long.
|
|
|
Post by rossman40 on Feb 6, 2010 8:27:50 GMT -5
You can get 90gr Sierra MatchKings or Bergers fairly easy. They will not fit in a magazine though and guys are shooting 1000yds with them at Perry.
|
|
|
Post by craigf on Feb 8, 2010 22:14:23 GMT -5
I tried using them in a bolt gun with a 7" twist. They, bergers, shot .5 MOA but were much slower compared to 80 grainers which shot .25 MOA. I stayed with the 80s.
|
|
|
Post by thelefthand on Feb 15, 2010 19:01:48 GMT -5
I found that out of my AR the 75gr bullets actually shot best at longer ranges (500 ~ 600 yards). My barrels like a max charge of N540 and that propel the bullets at 2950 ~ 3000 fps. If I go with a heavier bullet, I start loosing more velocity than I gain with the higher B.C. 75gr burgers give me the most consistent results, but the 75gr A-Max did pretty good to.
|
|