|
Post by davewolf on Sept 6, 2009 19:03:54 GMT -5
This is my second day shooting my new TenPoint Titan HLX. The first day was in an indoor range, this is outside. Inside I shot 14 shoots, to get it close to where I wanted it at 20 and 30-yards. The first photo is the results of shooting it off my Gander Mtn shooting stick at 20-yards. This is at 30-yards--you might note that this group is a little loose and was shooting a little low and to the right. This is not a 100-yard sporting arm as some claim. Adjusted the scope and had to quit after 12-shots. Plan to watch the DVD provided tonight. I've found that as with all sporting arms, these will take time and practice. Anyone else have a TenPoint? The scope has three rectiles. One for 20, one for 30 and one for 40. When I get it where I want it and 20 & 30 I'll try 40. If I had to hunt with it tomorrow I would limit my shots to 20-yards. Have a great day! Dave
|
|
|
Post by davewolf on Sept 7, 2009 17:12:50 GMT -5
Shot my crossbow again and decided to try 40-yards. Because I may never shoot another 'group' like this at that distance, I thought I would post it here. I'm starting to really like this TenPoint! Have a great day! Dave
|
|
|
Post by dougedwards on Sept 7, 2009 20:13:27 GMT -5
Great shooting Dave! You won't be shooting three arrows with broadheads on them. You would cut up your fletchings with groups like that. The Ten Point is a fine crossbow. What arrows are you shooting?
Doug
|
|
|
Post by sw on Sept 7, 2009 21:37:26 GMT -5
That's an excellent group!. Don't rule out expandibles. Generally the range limitation with a quality x-bow(or h-bow) is in the hunter's mind. This is somewhat like the person who sells a well kept 6 year old car at 100,000 miles: the real value of the up-keep/quality of car is in those 2nd or 3rd 100,000 miles. Incidentally, my son's 1998 Accord is nearing 300,000 miles - it has had 1 set of brakes and a clutch/pressure plate/throw-out bearing(aka thrust bearing).
|
|
|
Post by dougedwards on Sept 8, 2009 17:54:10 GMT -5
That's an excellent group!. Don't rule out expandibles. Generally the range limitation with a quality x-bow(or h-bow) is in the hunter's mind. This is somewhat like the person who sells a well kept 6 year old car at 100,000 miles: the real value of the up-keep/quality of car is in those 2nd or 3rd 100,000 miles. Incidentally, my son's 1998 Accord is nearing 300,000 miles - it has had 1 set of brakes and a clutch/pressure plate/throw-out bearing(aka thrust bearing). My hunting pickup, a 1999 Toyota Tacoma 4WD has 420,000 miles and still going strong. Have replaced the alternator twice, one universal joint and rear shocks......that's it! I must say that I never expected that when I bought it new. God is good. Doug
|
|
|
Post by davewolf on Sept 8, 2009 22:10:52 GMT -5
Thanks: I'm shooting Easton XX75-2219. I have three carbon arrows, but hate to switch with the results I've been getting from these at half the price. I'm using 100-grain field tips and will be shooting Rage two-blade expendables soon. As for my vehicle..well it closing in on 160,000 miles and has taken more than that to keep it running. I practiced again today with the same results, and yes those fletchings are touching one another! Have a great day! Dave
|
|
|
Post by sw on Sept 9, 2009 5:59:47 GMT -5
Davewolf, Try both arrow types. Also, consider using 125g field tips. Generally, crossbow arrows shoot more accurately with more FOC. If the 125g points do enough better for you, consider the 125g Spitfires. I like Rages more than Spitfires(but like both nearly equally) but will shoot 125 Spitfires for the slightly greater long range accuracy. Those 4 dots are to shoot 1 arrow each at. With good shooting and a quality x-bow(you have one don't shoot at the same dot.
|
|
|
Post by kevin k on Sept 9, 2009 17:29:53 GMT -5
Dave nice shooting ive been shooting ten points for 9 years at least i love them id stay within 40 yards 25 to 30 is best the 100 grain is the way to go shorter ferrow makes them stronger i prefer spitfires the detent clip has it all over the oring they ware fast or brake when put in a quiver or hit a branch imo the aluminum has it with crossbows more spline for the sharp jolt from the poundage ive set up quite a few of these id put beaver tail silencers on the string about the only thing that will stay on for any time plus they work then limb savers then put mole skin on the accra draw covers and on top of the arrow rest spring then i put some on the top of the accra draw claw so it doesnt hit your scope when you pull it up that should quiet it down alot keep shooting and dont forget to lube that rail alot to stay consistent and to keep ware to a minimum good luck hunting you will love the ten point i still have my first one a woods men plus not made any more back when they were hunter but thats another story. kevin k
|
|
|
Post by davewolf on Sept 9, 2009 20:41:40 GMT -5
Thanks... I'll try and get all of that done before archery season, and work and one more groundhog to take with the T/C. Just bought 3 more bolts of the same make, and as I said have 3 carbon arrows sitting here. Yes, I know that I should be shooting one arrow at one dot, but wanted to see how well it 'grouped" first. Just bought a three pack of Rage's two-bladers. For this year I want to stick with the recommended 100-grain tips. Then I might start experimenting. Now I want to try the carbon just to see how they fly. Like the mole skin ideas though and should and silencers, should be able to get that accomplished in time. Right now I'm one day into another 7-day work week, and just finished sending two articles and photos to my editor. But my shots will be all within reason, nothing over 40, and most likely around 20-30 yards. Thanks for the suggestions. Only problem I've experienced so far is that my server string keeps separating where the Acudraw pulls the string. Any suggestions on that one? Have a great day! Dave
|
|
|
Post by kevin k on Sept 10, 2009 10:37:03 GMT -5
Dave what do you mean separating? are you talking one of the stings in it loosening up out of the twist if so it happens its not a big issue id use it and replace the string next season like normal it is probably the way they made the string that causes that. to lose of a wrap on some of the strands if any fray replace and keep it waxed best thing for your string is to keep the rail well lubed i know i told you that already but that will save your string big time good luck i cant wait for oct 1st i now have 3 doe permits and 2 regular tags hopefully tomorrow i can get 2 more doe permits kevin k
|
|
|
Post by davewolf on Sept 11, 2009 17:13:00 GMT -5
Kev; The "serving string" the heavier string where the Acudraw is placed to pull, separates and then I shove it back with my fingers. Nothing damaged as of yet or string wear, just seems loose. The tech here suggested putting super glue on that area, of course not the part of the string where it flies down the rail, and yes, I lube the rail before shooting it. Rain here, but I have a total of 5 doe permits and of course I can shoot a buck. Doubt that I'll use them all, but do want to take at least one doe with my inline. Other than that I'm very pleased with my TenPoint,despite all the guff I take from some folks who call themselves "real bow hunters" because they use compounds! Have a great day! Dave
|
|
|
Post by kevin k on Sept 12, 2009 13:36:18 GMT -5
okay got it yes that happens he is right that will work for a while but it just needs to be retied wrap it tight push the end under and thru and pull tight then do that if needed dont know how long the super glue would hold with the jolt might want to try good fleching glue it flexes abit good luck Dave. kevin k
|
|
rogo
Button Buck
Posts: 17
|
Post by rogo on Sept 12, 2009 15:27:47 GMT -5
Congrats on the Ten Point Dave. Like your ML you made another good selection.
I have had a (Ten Point) for 11 years now. Mine is the Woodsman Plus. Made by Hunter which is now 10 Point. After much shooting and trying different broadheads I settled on the 125gr Wasp 3 blade fixed. You I believe will also find that the 125gr head is better for trajectory and striking energy than the 100 gr. But that is just my opinion.
As you practice and a couple of years go by you will gain confidence in that crossbow just like your ML. Maximum range will have to be decided by only you. I once took a doe at a lasered 63 yards but this was when I had the bow for 7 years and knew what I and it could do. Also the deer had no idea I was there and was completely relaxed while feeding.
Good luck to you Dave and enjoy your newfound sport.
Also do like I did and ignore the "real bow hunters"
|
|
|
Post by davewolf on Sept 12, 2009 19:43:16 GMT -5
Thanks guys: I like all the suggestions and with bow season coming in early October I will shoot and shoot and shoot, until I feel confident with what yardage works for me. So far, so good. Just wanted you folks to know I used Flexament--used in fly tying, which I rarely find time to do any more. It's waterproof and is made to flex....constant rains here, mixed with a goofy work schedule has kept me from shooting, but I'll be back out there soon! Thanks again! Have a great day! Dave
|
|
|
Post by sagittarius on Sept 13, 2009 11:49:24 GMT -5
Dave, Looks like you're going pretty good with that Crossbow. TenPoint makes a great bow ! Love shooting my crossbow more and more. Even more than I would have thought; more fun than my compound ever was.
|
|
|
Post by davewolf on Sept 13, 2009 19:07:09 GMT -5
Yes, I'm having fun too, starting to get familiar with it, and that takes some time. I have carried my Triumph all summer shooting groundhogs and now am shooting a xbow with a lot of desire to get to know it, so it becomes second nature to me. Still switching back and forth between xbow and inline does have its challenges. Like where the safety is located. Bought some camo tape tonight, to put on the foot stirrup, so it doesn't glare so much. As with the inline I want this for hunting and become more anxious with each passing day to "field test" it. Deer season can't come soon enough! Have a great day! Dave
|
|
|
Post by killahog on Sept 25, 2009 10:48:56 GMT -5
In my opinion you bought the best crossbow on the market I own the stealth x2 and I am very happy with it and with the customer service. I have been to the Tenpoint factory 2 times and they are very concerned with customer satisfaction. Dave There is one accessory that I would recommend for your crossbow it is a Progressive Dampening Package. One of the limitations to shooting these crossbows is the noise, even though your bow is deadly accurate most deer are in motion before the bolt gets to them if you can quite it down a little I feel it helps. You might think your bow is quite now but after you install these you will realize just how loud it actually was, It is worth the cost.
|
|
|
Post by davewolf on Sept 27, 2009 20:03:16 GMT -5
Thanks, Killahog: I've checked them out and tested them in an indoor range. Does seem to help somewhat, but there's still a lot of noise when I shoot. I'm hopeful that TenPoint of someone comes up with a "better idea" and I'm sure they will! Thanks again, Have a great day! Dave
|
|