|
|
Post by archstanton on Feb 1, 2023 11:10:49 GMT -5
I have been ML hunting since the T/C Thunder Hawk and Break-a-Way sabots were new technology. I just made the switch to Arrowhead Smokeless, I'm hear to learn by reading and asking questions. I hope to be welcome.
Arch
|
|
|
|
Post by billc on Feb 2, 2023 19:08:14 GMT -5
Welcome you are! Read and ask away.
|
|
|
|
Post by reloader22 on Feb 2, 2023 20:19:15 GMT -5
I have a T/C .54 cal Stainless ML. 120 gr gun. Musket cap nipple. No breech plug in these guns. This is my 1st ML bought in 1998. Shoots awesome with real BP and short bullets due to 1:38 rifling. the Barnes .50 cal 275 gr copper HP in a 54/50 sabot and 100 gr FFFg shoots 1 1/2" groups at 100 yds. But I digress, Welcome to the board.
|
|
ghay
Button Buck
Posts: 1
|
Post by ghay on Jun 29, 2023 8:56:39 GMT -5
Hello All,
I am a long-time hunter/shooter/reloader and have just built a converted Paramount rifle with a Brux 1-15 barrel in .40 cal. I would love to hear from anyone who could share load advice and experiences as I develop loads with 250-300 g high BC projectiles with long distance capabilities. I have had a good bit of experience with the .50's and .45's, but this is my first venture with a .40. I am assuming some rifles like wads and that will have to be determined at the range. I would prefer not to have to deal with duplex loads in the field but realize that is a possibility if a single powder/bullet combo proves difficult to find.
Thanks in advance for any and all assistance, this looks like a great place to get acquainted with folks that love the same things I do,
Gary
|
|
|
|
Post by dannoboone on Jun 29, 2023 13:14:16 GMT -5
Welcome to the board, Gary!
Take a peak at your messages.
|
|
|
|
Post by alexcray on Jan 30, 2024 23:37:44 GMT -5
Welcome you are! Read and ask away. Whether you're looking for tips on optimizing your Obsidian setup, exploring different bullet and sabot combos, or just swapping hunting stories, this community is here for you. Don't hesitate to ask any questions that come to mind, no matter how technical or basic. We've all been there, and someone out there will have the answer or the experience to guide you. |
|
|
|
Post by alexcray on Feb 4, 2024 22:25:35 GMT -5
Welcome you are! Read and ask away. Welcome to the world of smokeless muzzleloading (SML) hunting! It's exciting to hear you've been involved in muzzleloading since the early days of T/C's advancements and are now venturing into the realm of Arrowhead Smokeless. It's clear you have a wealth of experience and a healthy thirst for knowledge, which are both highly valued in any community. |
|
|
|
Post by alexcray on Feb 15, 2024 21:28:42 GMT -5
I have been ML hunting since the T/C Thunder Hawk and Break-a-Way sabots were new technology. I just made the switch to Arrowhead Smokeless, I'm hear to learn by reading and asking questions. I hope to be welcome.
Arch
Your long history with ML hunting gives you valuable insights and perspectives that others can learn from. What tips do you have for transitioning to smokeless? |
|
|
|
Post by alexcray on Apr 18, 2024 1:19:30 GMT -5
I have been ML hunting since the T/C Thunder Hawk and Break-a-Way sabots were new technology. I just made the switch to Arrowhead Smokeless, I'm hear to learn by reading and asking questions. I hope to be welcome.
Arch
The official Arrowhead Rifles website (https://arrowheadrifles.com/) is a great resource. They have information on their Arrowhead Obsidian Smokeless Muzzleloader, including specs and how it works. They also sell reloading supplies and other SML parts. |
|
