|
|
Post by rvaughan on Aug 31, 2022 20:06:30 GMT -5
Looks like Arrowhead no longer has .45 Cal prefit barrels for Savage 10ML2. Is there anyone else that make them?
|
|
|
|
Post by dannoboone on Sept 1, 2022 10:30:28 GMT -5
Somewhere I read that PacNor will make a barrel, but they
have yet to replace the tooling for the breech plug area
(because of the fire).
|
|
|
|
Post by rvaughan on Sept 2, 2022 12:19:21 GMT -5
Thanks. Unrelated question. My Encore 45/70 conversion will stack bullets using Barnes 195, blue harvester sabot and 36 grains of N110. I couldn't find the Barnes anywhere so I bought some Lehigh 195 gn hollow points to see if they would work as a substitute. There was a good bit more loading resistance due to the factory knurling on the Lehighs. The Lehighs measure .399 to .400 above and below the knurling, the same measurements for the Barnes, (.399 - .400 no knurling). I am going to run some Lehighs through the sizing die for a consistent .399 diameter. Has anyone ever resized to help accuracy using sabots? If anyone knows where to get Barnes 195's then I just typed a lot for nothing. Any feedback is appreciated.
|
|
