making bullets pointed ( Spitzerized)
Dec 16, 2021 12:35:50 GMT -5
Post by smokeeter on Dec 16, 2021 12:35:50 GMT -5
I've been asked allot about how I point my muzzy bullets. I've been doing this a long time and have tweaked a few things along the way.
I had some custom dies made , both for a specific bullet diameter and a nose punch to form the spire point. The nose punch has to be the same size as the sizing die. ie. .4515/2 or .458 etc. These dies are also hardened. With this set up you can also bump up a bullets diameter example from .452 to .458. this works great for full forming bullets in our .45 cal barrels.
The reshaping process entails a stock bullet placed in the die and then with the aid of hydraulic press ( mine is made from a 4 ton bottle jack), the bullet is squashed into shape of a particular nose shape. This only works on lead or lead core jacketed bullets, mono's not so well and I didn't want to compromise the dies. The lead core gets forced up thru the hollow point of the stock bullet and forms the point. This process also ensures that all bullets end up the same diameter and are concentric.
When bumping up a bullets diameter a smaller bullet is placed in the larger die and when the bullet is squashed under pressure it fills the die and ends up to the larger size.
I like tinkering and take great satisfaction in taking game and shooting good groups with MY Bullets.
When I resize bullets I just run the bullet thru the particular sizing die with an arbor press and a brass push rod.
I don't know if the pointing helps especially at closer distances ( less than 300 yrds) but I think it helps in controlling the expansion and thus better terminal ballistics, plus it also builds confidence in my shooting. I haven't seen any ill effects of this except for the time spent in the process.
Here are a few pics of the equipment used.
I had some custom dies made , both for a specific bullet diameter and a nose punch to form the spire point. The nose punch has to be the same size as the sizing die. ie. .4515/2 or .458 etc. These dies are also hardened. With this set up you can also bump up a bullets diameter example from .452 to .458. this works great for full forming bullets in our .45 cal barrels.
The reshaping process entails a stock bullet placed in the die and then with the aid of hydraulic press ( mine is made from a 4 ton bottle jack), the bullet is squashed into shape of a particular nose shape. This only works on lead or lead core jacketed bullets, mono's not so well and I didn't want to compromise the dies. The lead core gets forced up thru the hollow point of the stock bullet and forms the point. This process also ensures that all bullets end up the same diameter and are concentric.
When bumping up a bullets diameter a smaller bullet is placed in the larger die and when the bullet is squashed under pressure it fills the die and ends up to the larger size.
I like tinkering and take great satisfaction in taking game and shooting good groups with MY Bullets.
When I resize bullets I just run the bullet thru the particular sizing die with an arbor press and a brass push rod.
I don't know if the pointing helps especially at closer distances ( less than 300 yrds) but I think it helps in controlling the expansion and thus better terminal ballistics, plus it also builds confidence in my shooting. I haven't seen any ill effects of this except for the time spent in the process.
Here are a few pics of the equipment used.
