|
|
Post by smokeless on Oct 9, 2021 11:41:27 GMT -5
Hello everyones
I juste receive a shippement from bob parker
Got some nice 300/328grs 45 cal black max tring to get some infos about imr 3031 loads anyone try this powder with a 300 black max i will shoot them in a bad bull bolt gun
Thanks guys
If any one of you tried others powder with good success let me knoe
Smokeless
|
|
|
|
Post by smokepolehall on Oct 12, 2021 21:33:32 GMT -5
I have used 3031 in reloading but not in the sml. I think it maybe on the slow side. Maybe something like H4198 or RL7 would be fast enough to work. I don't shoot bullets that heavy in my Break action
|
|
|
|
Post by dannoboone on Oct 13, 2021 11:19:00 GMT -5
My personal bullet weight limit is 275gr, and have used 3031
in duplex loads which are very accurate. However, those loads
won't help here.
The only one I know who has used 3031 with good success with
heavier bullets is hillbill who does little posting here
anymore but posts a lot over on Hank's message boards.
Update: Hillbill became disappointed in 3031 because of temp
sensibility issues and quit using it, although he said it
was very accurate. Personally, I have two temp sensible
loads (including the 3031 load) and do my load workup at
temps close to those during season.
TGinPA worked up a load for 300gr bullets which is load
21g) in his pressure traces, using 90gr IMR3031 with a 300gr
Remington bullet. FPS 2845, PSI 41,134. He would have been
using a 209M primer, I believe.
|
|
