Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 16, 2014 12:22:26 GMT -5
What do ya do when you're in need of specialty accessories? Well, since you cant run to Wal Mart, (can't make them yourself in my case), or go anywhere else and get the accessories you need when you have a sub caliber, such as my .392/.400's, what do you do when you need stuff, like loading jags, bullet starters and powder funnels, and you have a broken handle on your rock chucker press? Well that was where I was at, so Cole (Myers 129) hooked me up! and in a big way. Cole went above and beyond and sent me an awesome package full of accessories and a COUPLE new handles for my press! Cole did an amazing job making this stuff, it looks and feels good, great quality and fit and finish on every single piece, very handy and functional stuff. Thanks a million Cole, not only can and do you build a nice gun, but you can and do build nice accessories to boot... Anyone look him up if you're in need of anything, from advice, to builds, to accessories, he's a great guy who does great work, not sure if there is anything this guy can't make, at a more than reasonable rate and very timely. The cMc factory is booming...
|
|
|
Post by rambler on Dec 16, 2014 12:36:21 GMT -5
those are some nice looking accessories!
|
|
|
Post by cowhunter on Dec 16, 2014 12:40:30 GMT -5
Very nice looking stuff. I'll have to buy some funnels off him. Why are the funnels two different sizes? Personal preference?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 16, 2014 12:42:36 GMT -5
You'll look like cousin Eddie with that 1.5" diameter funnel in your front pocket. The little ones are for field use, they are 3/4" but the 45* makes quite a difference compared to trying to pour onto a recessed crown.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 16, 2014 12:48:02 GMT -5
You'll look like cousin Eddie with that 1.5" diameter funnel in your front pocket. The little ones are for field use, they are 3/4" but the 45* makes quite a difference compared to trying to pour onto a recessed crown. Would you have a price list for the tools shown here?
|
|
|
Post by jims on Dec 16, 2014 12:48:34 GMT -5
Good looking items.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 16, 2014 13:03:34 GMT -5
He makes more than sub caliber stuff too, here is a .45 funnel next to a .40 funnel.
|
|
|
Post by Dave W on Dec 16, 2014 13:25:47 GMT -5
Stuff looks top notch!
Odds that you could make something similar out of delrin? Least I think that is what Dewey uses for bore guides?
|
|
|
Post by Richard on Dec 16, 2014 15:12:34 GMT -5
Definitely nice looking stuff! Just takes a lathe and the knowledge on how to use it! Even one of these cheap little bench top lathes you can buy at places like Harbor Freight for 3 or $400 buck and you can turn out some neat stuff/gadgets with a little practice. Richard
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 16, 2014 15:18:32 GMT -5
If a guy has ideas in his head nonstop one of those little lathes will pay for itself in short order. You can save yourself a ton of money making your own gadgets.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 16, 2014 20:56:58 GMT -5
You'll look like cousin Eddie with that 1.5" diameter funnel in your front pocket. The little ones are for field use, they are 3/4" but the 45* makes quite a difference compared to trying to pour onto a recessed crown. Would you have a price list for the tools shown here? Sent you a pm, thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 16, 2014 23:16:36 GMT -5
Stuff looks top notch! Odds that you could make something similar out of delrin? Least I think that is what Dewey uses for bore guides? Didn't mean to ignore you! These should be able to be made out of delrin also. I have some nylon on hand if you want to try one of those also.
|
|
|
Post by rambler on Dec 17, 2014 18:16:37 GMT -5
Here are some prices that myers129 has for the accessories:
1.5" diameter funnels--$25 3/4" diameter funnels--$15 Loading jag--$15 Short starter with jag and bore guide--$40 Standard length 1" diameter press lever--$30 2' long 1" diameter "Dirk" lever--$40
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 18, 2014 17:07:57 GMT -5
Here are some prices that myers129 has for the accessories:
1.5" diameter funnels--$25 3/4" diameter funnels--$15 Loading jag--$15 Short starter with jag and bore guide--$40 Standard length 1" diameter press lever--$30 2' long 1" diameter "Dirk" lever--$40
They are all worth every penny. Nice stuff, especially when you can't just run out and get it..
|
|
|
Post by tnhunter54 on Dec 18, 2014 17:36:46 GMT -5
Very nice and a great price.
|
|