|
Post by Jon on Oct 30, 2014 8:23:21 GMT -5
I haven't seen it mentioned in a while. Has anyone come up with a reasonable knurling tool (machine) I saw some great ideas but haven't seen anything recently? On another note I'm still looking for some 1 or 2 lb. clays and 3 lb. Varget powder hazmat ok.
|
|
Deleted
Deleted Member
Posts: 0
|
knurling
Oct 30, 2014 8:37:29 GMT -5
via mobile
Post by Deleted on Oct 30, 2014 8:37:29 GMT -5
I've been using a knurling tool I got off amazon. I still have to use a file also but it's allot easier. Trying to figure out a different way than the file but problem is I have to use file otherwise the bullet won't spin when used just will the knurling tool. I suspect I got too coarse of a knurling tool.
Before when I knurled I used two files and was only able to get a .452 bullet to .453. Now with the tool and file I can get it to .455-6. I then full form the bullet and my results have been very repeatable. I have great groups and consistent loading all the way down my barrel where as before the first part of the barrel was/is choked.
After my next range session I hope to post results. I just got a phone skope and hope to record it also.
|
|