|
Post by xpert07 on Apr 16, 2014 6:08:55 GMT -5
Ok folks, I replaced the trigger plunger on the T/C last nite and cannot get the hammer to set. I've had this apart several times for cleaning w/o problem but not this time. Im certain all the parts that came out went back in too. Any Idea's at all, the schematics I have are poor at best. I guess the trigger sear isn't catching.... I'M NO GUNSMITH, AND MAY JUST NEED ONE! LOL
|
|
|
Post by encore50a on Apr 16, 2014 6:52:53 GMT -5
Have you tried to back off the hammer spring nut to "not so tight"?
Encore platform rifle owners........... If you don't have the following site bookmarked, you SHOULD. www.bellmtcs.com/store/
|
|
|
Post by hawghunter on Apr 19, 2014 18:02:31 GMT -5
|
|