disc replacement barrel & my luck

[rjhans53]

I arrive at the range this morning with the replacement barrel installed, I shoot twice @ 25 1st shot 2" right, Adjust, 2nd shot 1" low, move to 50. 1st 1/2 low, 2nd 1" low 3rd 1 1/2 low. Turn the dials and the 4th shot 1/2 right, 5th bulls eye, 6th feels funny but cuts the 5th shot. I check the gun and the stock screw appears to be 1/8" long and the barrel is loose in the stock. I put it in the case, finish up with my CF and here I am. I went by the hardware store and picked up a couple of SS 1/4 x 1 screws and I'll trim it down. I'm pretty sure Knight only has 1 length of stock screw and I know it's the one that come with the gun, so I'll email knight and see if they have a clue why. Sure glad it isn't a week before season. Just clean the thing the screw length didn't help, different stock seems to fix it, Knight CS here we go again

[robnj]

That stinks. I just measured the stock screws on my original DISC and Elite. They look to be the same ... 1".

I hope they drilled hole in the barrel deep enough ! Maybe the screw hole needs to cleaned up with a tap ?

Anyway... good luck and let us know how it works out.