|
Post by 03mossy on Jul 10, 2013 9:33:01 GMT -5
Started as a Stevens 200 .308 .45 McGowan smokeless muzzleloader barrel B&C Duramaxx stock SSS Fluted bolt body 209 bolt head Rifle basix trigger Mscott bolt handle NSS recoil lug NSS precision barrel nut Talley lightweight rings Zeiss Conquest 3-9x40 Action and all the other parts that are black are cerama coated by me. Still in the learning phase with all things smokeless but it is showing promise at the range. But with your help i'll get there. Thanks to everybody here for all your help and putting up with my dumb questions, there will be more I promise lol. And special thanks to Omega45 as we exchanged probably 50 emails back and forth helping me out.
|
|
|
Post by ratsnakeboogy on Jul 10, 2013 9:50:12 GMT -5
Nice rig!!!
|
|
|
Post by rangeball on Jul 10, 2013 11:14:17 GMT -5
Awesome looking rifle. No need to group. Just show the animal what it's up against and it will fall over dead.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 10, 2013 12:23:12 GMT -5
Very nice rig....I was wondering who the first one would be with the new fluting available on the savage/stevens bolt....COOL...tight groups and short tracking 2u...Greenhorn
|
|
|
Post by Dave W on Jul 10, 2013 19:15:15 GMT -5
Very nice rig, bolt looks really sharp! Good luck with her.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 10, 2013 19:23:34 GMT -5
looks good, I tried to get Fred to flute a bolt for me but quit trying after 2 months of no answers..
|
|
|
Post by dave d. on Jul 11, 2013 8:44:35 GMT -5
Very nice looking rig. Best of luck with her
|
|
|
Post by longbowshtr on Jul 11, 2013 9:12:35 GMT -5
Really nice looking rig.
|
|
|
Post by mirage243 on Feb 17, 2015 22:50:32 GMT -5
03Mossy, I showed up just like you recommended. Very nice rifle you built there. I've already spoke with Richard.
|
|
|
Post by 10ga on Feb 18, 2015 0:46:54 GMT -5
Nice job! That is a rig to be proud of. It's great when you can at least "do it yourself" for most of the work. Least other than the fancy machining you did it yourself? Now the best part, load development and getting the glass to 0. Cool spring weather great for shooting. Nice! 10
|
|
|
Post by 03mossy on Feb 18, 2015 14:26:17 GMT -5
Well I have hunted with this rig for 2 seasons now and have yet to pull the trigger. Sure is fun at the range tho!
|
|
|
Post by 03mossy on Feb 18, 2015 14:31:52 GMT -5
03Mossy, I showed up just like you recommended. Very nice rifle you built there. I've already spoke with Richard. Awesome! You are going to love this journey! Just be careful, as soon as you are done with the first build these guys will talk you into another one.
|
|
|
Post by Richard on Feb 18, 2015 15:52:20 GMT -5
A nice practical looking rig and not to gaudy! Good luck with it! Richard
|
|
|
Post by rileydog on Feb 18, 2015 18:41:32 GMT -5
Very nice rifle . Is it a small or large shank ? Good luck .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2015 20:18:53 GMT -5
Nice looking set up there.
|
|
|
Post by 03mossy on Feb 18, 2015 23:13:16 GMT -5
Very nice rifle . Is it a small or large shank ? Good luck . Its a small shank. It was built off of a Stevens 200 action which are all small shank. Had the dreaded sticky primer issue with the first hundred or so rounds but the good folk here helped cure that and haven't had one stick in a long time.
|
|