|
Post by Mid_Tn_Plowboy on Sept 1, 2012 22:59:07 GMT -5
Here is a heads up on anyone thinking about buying a Savage LRPV HS Precision stock for an upgrade. Factory Savage ML-II synthetic trigger guard won't work and longer bolts are a must! Minor set-backs for a great stock!
|
|
|
Post by Mid_Tn_Plowboy on Sept 2, 2012 23:15:36 GMT -5
Here is a lil comparison of the two.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 3, 2012 10:07:36 GMT -5
check the action hole spacing on the new stock to make sure its the same as your MLII, still useable if not but a little more work,,
|
|
|
Post by Mid_Tn_Plowboy on Sept 3, 2012 10:53:51 GMT -5
4.4" spacing on both with 2.2" to 3rd screw. I know not idea location but still has to be an improvement. ;D
|
|
|
Post by lwh723 on Sept 3, 2012 10:59:39 GMT -5
with 2.2" to 3rd screw. I know not idea location but still has to be an improvement. ;D Shouldn't matter since you're bedding it.
|
|
|
Post by Mid_Tn_Plowboy on Sept 3, 2012 12:34:22 GMT -5
Maybe not. I tired to modify the ML-II trigger guard to fit the LRPV stock but that was a failed attempt. So now I am going to get in touch with Savage and check on getting a trigger guard for the LRPV stock or find out interchangeability of other guards.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 3, 2012 18:34:20 GMT -5
Did you find a supplier that is carrying the HS stocks now? I looked for quite a while, and no one had them. Ended up going with a Whidden 3 post aluminum bed that I'm dropping into a aftermarket laminate stock.
|
|
|
Post by Mid_Tn_Plowboy on Sept 3, 2012 21:07:46 GMT -5
Earnhardt, It is a pull off from the production Savage Model 12 Long Range Precision Varminter. HS supplies the stock for that model. *Note has 4.4" screw spacing.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 3, 2012 21:24:58 GMT -5
Earnhardt, It is a pull off from the production Savage Model 12 Long Range Precision Varminter. HS supplies the stock for that model. *Note has 4.4" screw spacing. I know. But I'm building a SML based on the Savage target action. I wanted to buy the HS LRPV stock, but it was on back order til at least mid Dec. everywhere I checked.
|
|
|
Post by Mid_Tn_Plowboy on Sept 3, 2012 21:56:16 GMT -5
Oh my bad sir. I posted on Long Range and a guy contacted me. So I lucked out I guess.
|
|