|
Post by dave d. on Mar 21, 2009 8:37:43 GMT -5
:)guys that have a 600 mowhawk laying around that your not using well how about a conversion?a thread came up just recently about this very subject so the only thing that was in doubt was specs compared to the 700.well the only concern for us is from the bolt lugs forward and with alittle phone call to casey at pac-nor he confirmed that they are the same.so a phone call to pac-nor for a dd rem ml barrel is all you need besides a call pete at pa machine for the plug.hope this helps some guys interested.
|
|
|
Post by thelongrider on Mar 21, 2009 17:12:42 GMT -5
Hey Dave, Could the Pac-Nor DD barrel and Pete's breech plug work with a Ruger 77 action? If so I would love to convert one.
|
|
|
Post by dave d. on Mar 21, 2009 17:54:26 GMT -5
:)mike i will find out.
|
|
|
Post by moto357 on Mar 21, 2009 20:00:45 GMT -5
thanks for posting Dave, be cool to see a few of these! Talked to Pete today for a while, he's gotta be one of the nicest people to chat with. I'll get one of his plugs for my conversion, but the conversion itself will temporarily be put on hold. I'm really looking forward to this and I hope some others with 600's get this done too! Thanks again for going out of your way to help an unknowing dude like myself!
|
|
|
Post by moto357 on Mar 21, 2009 20:06:14 GMT -5
thelongrider, check out SMI, Ron also converts ruger 77...I think there are some posts from others with this on the old board. Ron will also work with whatever barrel blank you choose. If you get your own PAC-NOR blank(assuming you are craving a PAC-NOR) SMI will make your desired conversion. Their standard barrels are Douglas tho. Hope this might help a bit with you ruger
|
|
|
Post by screwbolts on Mar 22, 2009 6:41:40 GMT -5
Hey Dave, Could the Pac-Nor DD barrel and Pete's breech plug work with a Ruger 77 action? If so I would love to convert one. Pacnors website is very easy to find and if you do find it, you will see that they offer prefit barrels for all three versions of the R77, I am sure they will chamber for Pete's plug also just like the Rem barrels. Ken
|
|
|
Post by dave d. on Mar 22, 2009 9:41:18 GMT -5
:)ken there is more to it then just prefitting it to a 77 action.it has to do with distance from bolt face to barrel for this particular conversion.if it is further or shorter by to much a new chamber or plug will have to be sketched out which might not be something that pac-nor or pete want to do unless there will be alot of guys out there with 77's that want them converted.
|
|