|
Post by kevin k on Mar 12, 2009 10:06:21 GMT -5
hi just was wondering if any one tried this took my gun apart after shooting both pillers are touching barrel are marks on both. recoil lug is not contacting stock will bed. but on bolt screw instead of 3rd piller would it work to drill and tap the screw make it slotted to tighten and use smaller screw inside of it for bolt then you would only have to back off inner screw with allen head to remove bolt instead of whole bolt any try this or think it will or will not work. thanks kevin
|
|
|
Post by youp50 on Mar 12, 2009 12:16:39 GMT -5
Search the old board. RB had something on those lines.
|
|
|
Post by minst7877 on Mar 12, 2009 12:58:09 GMT -5
Richard where are you? He does this and it is excellent work.
DC
|
|
|
Post by Richard on Mar 12, 2009 16:36:25 GMT -5
Kevin k.........PM me if you would like to talk about your problem and I will give you my phone number. Or, go to the old message board and check on the stock I did (Hints and tips - stock work by Richard) and it will show plenty of pictures. Richard
|
|
|
Post by kevin k on Mar 12, 2009 18:32:28 GMT -5
thanks so much i looked at your picts thats pretty much what i was thinking but having screw internal in rear action screw and bedded so lug hits stock ill yea id like to know what you think ill pm you soon thanks again kevin
|
|