|
Post by wayles on Sept 13, 2011 19:48:09 GMT -5
Will a Timiny trigger for a rem700 will fit a rem700ml? Wanted to make sure before the $130 investment Wayles
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 13, 2011 20:35:55 GMT -5
yes it will fit but if it comes with a bolt release it will need to be taken off or it will rattle.
the factory trigger can be tuned to be almost as good as the timney as long as you stay above 2lbs....Bill
|
|
|
Post by wayles on Sept 13, 2011 20:59:44 GMT -5
Thanks Hillbill Wayles
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 13, 2011 23:04:56 GMT -5
Looks like you're going to have it ready to go by the time you get your barrel..... Can't wait to go shootin when you do.... Are you going with a different stock? Zen
|
|
|
Post by onecardchuck on Sept 14, 2011 11:10:24 GMT -5
Speaking of 700 ml triggers.
When I built my setup I replaced the 700 ml trigger and still have it. It is a fully functional stainless steel trigger with everything but the safety lever. When I bought my 700 ml for rebuild I did not realize the trigger lever was cracked and when I pulled it off the action it broke.
If anyone can use it send me a PM.
|
|
|
Post by wayles on Sept 14, 2011 18:45:06 GMT -5
Zen I will try the rem. ml stock first. I have already free floated it for the rem ml barrel. Can't seem to find any thing used but BDL's that have pillars or full bed. I guess I could pillar the rem. ML stock but its all tupperwear. Worst comes to worst I suppose I will buy a new hogue full bed ADL. The knight tupper wear stock shoots great as the last antelope can attest to. Don't know why the rem should be any different. But I also know if it don't shoot it will get a new stock even if I am frugal! Sure seems like a long time till the barrel gets here. Went out to tune the encore SMI a few days ago. Weather is changin a little. Lookin forward to shootin with you again. Wayles
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 14, 2011 21:56:51 GMT -5
Wayne... After today's drop in the temperature I'm looking to break my two out real soon. Went out this afternoon and saw deer everywhere and a few decent antelopes also.... I think the best overall deal out there in stocks is the prefinished laminate Boyd's, like the one I put on my .270... Unless your sold on a composite stock they're worth looking into... You're not going to give up anything hunting with your Encore .45 conversion...It's a shooter. For hunting purposes my H&R SMI .45 fills the bill more than adequately. The more I shoot it the better I like it....Always being a bolt action guy my go to rifle will always be my Savage Pac-Nor. It's hard to not like something that is capable of shooting 1" @ 200yds. See ya soon, Zen
|
|