picks
8 Pointer
Posts: 182
|
358/45
Sept 11, 2011 15:11:03 GMT -5
Post by picks on Sept 11, 2011 15:11:03 GMT -5
What would be the best powder or powders to try with a 358/45 sabot so that it doesn't drill through the sabot?I will be trying a .358 200gr ftx in a 45 pac. i have rl 7, rl10x ,5477aa,4759sr,4198,and a few more powders, i know there is a possibility that it will drill thrugh just want to know my best chance of getting it to work. thanx Mike
|
|
|
358/45
Sept 11, 2011 15:54:30 GMT -5
Post by hunter on Sept 11, 2011 15:54:30 GMT -5
I beleive I would try light loads of 10X out of those listed. I tried 4198 and rl-7 and 4759 , with light loads at no avail. You might try 33 gr. of 4759 to see if that is light enough to keep them from drilling. I beleive I would try to knurl the bullets if I was to try that combo again.
|
|
|
358/45
Sept 11, 2011 15:59:50 GMT -5
Post by mountainam on Sept 11, 2011 15:59:50 GMT -5
The only one in your stash that MAY work is 10x with light loads. And you'd be defeating the purpose. You may need to be in the Benchmark or IMR 8208XBR burn rates to not get a drill. You didn't say which sabot you're using. Hopefully it's a PR bullet .357x.45 and your barrel has a fast twist. I tried many times to no avail, but it may work with your twist. That's why my next build will be a sabotless .358" or .375" with full form dies. Good luck!
|
|
|
358/45
Sept 11, 2011 16:27:49 GMT -5
Post by 10ga on Sept 11, 2011 16:27:49 GMT -5
I tried the 358X45 route with 180 and 200 gr bullets with 4759 at 31 gr. and 4198 at 45 gr. and no success in my Encore conversion. Those loads were so low that I didn't even want to try less as they do good with my 200 gr. 40 cals. Did try some FFF Swiss and BH209 in my Bergara 45 barrel and that was OK if you didn't try to max it out. Been there, done that, got the T-shirt and it was a failure for me. If anyone has any success with any smokeless and the 358X45 sabots please post the formula. Thanks all, 10 ga
|
|
|
358/45
Sept 11, 2011 17:35:08 GMT -5
Post by lwh723 on Sept 11, 2011 17:35:08 GMT -5
Somebody asks this question every few months. It doesn't work. I've tried it! We need to make this a sticky!
|
|
|
358/45
Sept 11, 2011 19:50:21 GMT -5
Post by ratsnakeboogy on Sept 11, 2011 19:50:21 GMT -5
Somebody asks this question every few months. It doesn't work. I've tried it! We need to make this a sticky! True, but we also need to get someone to make a .358x.40 high quality sabot. I would absolutely love for this to happen.
|
|
|
358/45
Sept 12, 2011 11:34:01 GMT -5
Post by edge on Sept 12, 2011 11:34:01 GMT -5
True, but we also need to get someone to make a .358x.40 high quality sabot. I would absolutely love for this to happen. Ahhh, we can only wish ;D edge.
|
|
|
358/45
Sept 12, 2011 18:31:19 GMT -5
Post by lwh723 on Sept 12, 2011 18:31:19 GMT -5
True, but we also need to get someone to make a .358x.40 high quality sabot. I would absolutely love for this to happen. Ahhh, we can only wish ;D edge. Yeah it would be... do you know anyone that could make them for us?
|
|