|
|
Post by dennis31 on Jun 26, 2011 15:10:34 GMT -5
Today wanted to try to get more speed from yesterdays 10/50 4759/H4198. planed on shooting 11/50 12/50 & 13/50 4759/H4198. Yesterdays 10/50 avg 2651 ES 26, 2657 ES27, 2650 ES26. Today 12F warmer 11/50 avg 2741 ES 17, 12/50 2767 ES 50. Groups were poor with noslers and primers seperated with the 12/50 duplex, so i decided not to shoot the 13/50 and shot straight 50gns H4198 for the last group which shot best of the three. Does 90 and 110 fps faster with 1 and 2 gns more of 4759 and 12F warmer seem right?  |
|
|
|
Post by Savage Shooter on Jun 26, 2011 16:56:13 GMT -5
I thought your speeds yesterday were about 70fps slow, but it is possible for barrel differences to give that much. Guessing that lighting difference from yesterday to today can do this. But just a guess.
The 10/50 load should have been about 2740 or so.
|
|
|
|
Post by cuda on Jun 26, 2011 17:39:03 GMT -5
What cal was the gun sabot or sabotless?
|
|
|
|
Post by Richard on Jun 27, 2011 18:00:44 GMT -5
Dennis.........great target presention. I have a ton of stuff loaded up already for tomorrow or I would try you 10/50 load. So much stuff and only so much time ;D
Richard
|
|
|
|
Post by herman on Jun 27, 2011 19:58:38 GMT -5
I just got off the phone with Marty a few minutes ago and I plan to try the 195's at 300 with the 10/50 load.
Just got some rem.180 gr bullets from him yesterday and plan on trying them with the same load and the 200 xtp's.Then I plan to try the 64 grs of 4198 with the 200 xtp's to see what I get with them again.
All of these will be at 300yds.I think maybe I can get them all on my target board guessing at the scope settings???
Dennis if my chrony works I will post the speeds that I get.
|
|
|
|
Post by dennis31 on Jun 28, 2011 17:15:39 GMT -5
Cuda: 45cal
savage shooter, Richard & Herman: Thanks
|
|
