|
Post by dennis31 on May 12, 2011 15:05:46 GMT -5
Yesterdayi had shot 12/52 N120/H4198 and 11/54 N110/H322. Today tried 11/52 N120/H4198. 1gn less on the booster and 5 Deg cooler netted 75 fps avg slower. Groups were about the same. Weather that sounds right, seems like a lot to me. Herman, had i seen your post earlier i would have tried your suggestion. Next time ill add 2gn to the booster and 1gn to the main. Second load was 60gn N120. It had all the makings for what should have been been a very small group( two duplicate velocities with one inbetween the two) ;D. Unfortunatley i did not do my part . ran 5/32 bit through BP,checked vent prior and after shooting, was able to get .035 torch tip through vent after. Was able to get 80 shots on lehigh vent liner.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2011 15:51:36 GMT -5
dennis, about the same on the lehigh vents for me. over twice what the savage vents were yeilding
|
|
|
Post by Richard on May 12, 2011 19:10:11 GMT -5
Dennis..........don't beat yourself up on the "not doing my part!" I firmly believe there are "forces" here you have no control over. I will say it again................PISTOL bullets at RIFLE velocities and distances do not make for consistent accuracy. Richard
|
|
|
Post by dennis31 on May 12, 2011 19:39:32 GMT -5
Richard, Im not beating myself up . I realize that there are alot of varibles with this gun. Between measuring powder accurately, loading consistantly, consistant pressure while shooting, breathing, squeezing the trigger, follow through, what else could go wrong But i think i did the first two right with those velocities so all that is left is the human error. So that was ME , i didnt do my part .
|
|