|
|
Post by deadon on Feb 2, 2011 22:47:53 GMT -5
who is using this sabot and what kind of accuracy are you getting AND with what bullet and powder. Thanks in advance, Rusty
|
|
|
|
Post by alphaburnt on Feb 3, 2011 4:49:15 GMT -5
deadon, I am not qualified to post on this by experience, but, from what I have read on here, most dump the tan and buy Harvesters Light Blue smooth.
|
|
|
|
Post by hunter on Feb 3, 2011 6:52:21 GMT -5
In my opinion the tan sabots are all over the place on dimensions. I have not had good accuracy and when I mic. them they run from .455 to .458. with a .400 bullet.
I noticed one would load hard and then the next easier so when I checked them I quit using them.
|
|
|
|
Post by bob64 on Feb 3, 2011 7:02:27 GMT -5
Are the tan sabots made by MMP? I had the same problem with the MMP orange sabots with .458 bullets. I only use Harvester's now.
|
|
|
|
Post by sw on Feb 3, 2011 8:10:43 GMT -5
Are the tan sabots made by MMP? Yes. |
|
|
|
Post by joe21a on Feb 3, 2011 10:55:19 GMT -5
I use the tan mmp, seem to shoot well. The blue were to loose if I remember in my barrel.
|
|
