|
Post by wayles on Jan 19, 2011 20:41:24 GMT -5
What twist is the TC 45/70 barrel? What twist is required for a .350 cal? I have a smi conversion coming and I am quite sure sombody has already beat this .35 cal 200 grain ftx in a .45 barrel dead horse but wouldn't it be sweet if it would shoot. BC listed for that bullet listed at .300 Thanks
|
|
|
Post by bteague on Jan 19, 2011 20:50:29 GMT -5
encore 45-70 twist is 1 in 20.Billy
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 19, 2011 22:57:05 GMT -5
Wayne...How many breechplugs are you getting with that new barrel. I might have an extra one if you need it. I suppose that all SMI plugs will interchange. Zen
|
|
|
Post by wayles on Jan 20, 2011 1:11:35 GMT -5
Hi Zen No extra BP's but 4 or 5 ventliners. How many shots you getting out of yours before changing out. Barrel shipped Tue. I would guess I will see it mon or tue next week. Been dwelling on building a crank handel knurling device. Something that will give consistant knurl. Maybe a rack and pinon. I will come up with something. BH209 likes a lot of ramrod pressure . How about the smokless I would guess the same as BH209? Lookin forward to getting out. We won't have to worry much about barrel cooling Wayne
|
|
|
Post by joe21a on Jan 20, 2011 8:53:43 GMT -5
Tryed .35 cal. in the 45 cal.. could not get it to shoot very well at all. To small a dia. bullet. for 45 cal.
|
|