|
|
Post by xp100 on Dec 18, 2010 15:52:35 GMT -5
Where can I find 2 Remington ML nipples for factory 209 conversion. I have firing pin assembly and 2 breech plugs. Thanks for any info.
|
|
|
|
Post by hunter on Dec 18, 2010 16:19:14 GMT -5
PM sent
|
|
|
|
Post by Rifleman on Dec 20, 2010 12:35:19 GMT -5
What do they look like?
|
|
jag
Button Buck
Posts: 11
|
Post by jag on Dec 21, 2010 13:39:12 GMT -5
|
|
|
|
Post by sabotloader on Dec 21, 2010 14:33:47 GMT -5
xp100This is the factory 209 nipple.... It is not the best but if you have a facory hammer installed this the one you have to use...  This is the Cabela's/Canadian nipple, but you have to have the matching hammer to use it...  I think the one jag linked you to is the Canadian type
|
|
jag
Button Buck
Posts: 11
|
Post by jag on Dec 22, 2010 14:02:43 GMT -5
Correct, he would need their kit to use the nipples they sell. Their discription is a little misleading as it says " The Remington 700ML 209 replacement nipple".
Also available at Cabelas for $50, item 1K-217243
|
|
|
|
Post by Rifleman on Dec 22, 2010 16:14:15 GMT -5
So is there a real advantage to wrapping the breech plug in teflon tape? I know some used to do tis with the Savage, I never thought it neccessary as I used Lock-tite brand copper never sieze in the stick and it worked great. But is there something I am missing here? Thanks!
|
|
|
|
Post by sqezer on Jan 1, 2011 17:34:56 GMT -5
The Teflon is soooooooooooooo much easier to put on and no mess.
|
|
|
|
Post by Rifleman on Jan 2, 2011 19:15:31 GMT -5
Ok thanks!
|
|
