|
Post by ratsnakeboogy on Dec 15, 2010 9:34:16 GMT -5
I need to shorten my knight ramrod by a couple of inches(I had the barrel cut and crowned.
Any info on how to remove the inserts and cut it down?
Thanks,
Don
|
|
|
Post by rjhans53 on Dec 16, 2010 18:17:20 GMT -5
cut it, heat and pull the brass out of the short piece of ramrod, use ferrel cement and put it back on
|
|
|
Post by ratsnakeboogy on Dec 16, 2010 23:52:10 GMT -5
Thank you much!
|
|