|
|
Post by smokepole on Nov 24, 2010 19:25:10 GMT -5
Im shooting n110 250gr xtp short black mmp sabots. I am wanting a better group. Can anyone tell me if the barnes would shoot tighter groups and if so what grain bullet and what sabot?
|
|
|
|
Post by wilmsmeyer on Nov 24, 2010 19:26:10 GMT -5
Need more info. All guns shoot different.
|
|
|
|
Post by smokepole on Nov 24, 2010 19:28:31 GMT -5
i was wondering if the 250 grain barnes shoot better than the xtps and if so which sabots are you using?
|
|
|
|
Post by sw on Nov 24, 2010 20:29:51 GMT -5
What range are you wanting to shoot? What is your ultimate goal? What do you plan to shoot/hunt?
Great loads: 250SST/SW, 42-45g VV-110
250SST/SW, 65g VV-120 or 19/51 VV-110/H-322(RB's load)
Same powders as above and 250TMZ
300SST 58-60 VV-120, or 41-44g VV-110.
Straight VV-110 is really good.
|
|
|
|
Post by mike3132 on Nov 25, 2010 6:48:24 GMT -5
Im shooting n110 250gr xtp short black mmp sabots. I am wanting a better group. Can anyone tell me if the barnes would shoot tighter groups and if so what grain bullet and what sabot? Barnes bullets usually arent a accurate as the XTP. Bullet/sabot fit is the key to good accuracy. Work with your N110 in the 40 - 44 grain range and try different sabots like the Harvester short black. Ive found a nice snug bullet/sabot that takes about 30 lbs. of push shoots the best in a factory .50 barrel. You also might try 300 XTP's using the same sabots and grains of powder. Good luck, Mike |
|
