|
Post by huntrrr on Nov 8, 2010 8:49:23 GMT -5
I am considering doing a pacnor .45 conversion on a rem. 700 ml I have had for awhile. I am sure the info is available here just wanted to know the best way to go. I understand pacnor is making barrels for the 700 ml. I need to find out what is involved in the conversion. Thanks in advance Huntrrr...........
|
|
|
Post by dave d. on Nov 8, 2010 8:58:07 GMT -5
first thing you need to do is get in touch with hunter on this board and have him set you up with one of his longer boltnoses. Then you will need a hex head savage bp and a prefit dd REM ml barrel from pn and screw it on and headspace it off the face of the bp. You will grind alittle at a time until the bolt closes. Once the bolt closes you will need to drill the primer pocket deeper the amount you tool off the plug and your set. Goodluck
|
|
|
Post by huntrrr on Nov 8, 2010 9:15:41 GMT -5
what would be the easiest way to contact hunter?
|
|
|
Post by bush7mmstw on Dec 5, 2010 23:52:54 GMT -5
I am considering doing a 700 ML smokeless conversion with pac nor barrel and need some help getting started. I have located a 700 ML and need some help in putting it together. Any helpwould be greatly appreciated. Thanks, Bush7mmstw.
|
|
|
Post by dave d. on Dec 6, 2010 9:39:35 GMT -5
:)bush the first thing you need to do is get in touch with hunter in the above post to get your bolt taken care of. Click on his name and send him a private message. He will get back to you.
|
|
|
Post by bush7mmstw on Dec 6, 2010 11:30:05 GMT -5
Thanks Dave.D will do.
|
|