|
|
Post by deadon on Nov 1, 2010 12:38:28 GMT -5
|
|
|
|
Post by boarhog on Nov 1, 2010 13:41:10 GMT -5
Rusty,
They look fine from here! LOL
BH
|
|
|
|
Post by sw on Nov 1, 2010 13:47:08 GMT -5
Things tightened up with a little more powder. Looks very good to me.
|
|
|
|
Post by dans on Nov 1, 2010 14:00:38 GMT -5
Shoot 62 grains.
|
|
|
|
Post by Richard on Nov 1, 2010 15:43:32 GMT -5
Rusty...........it looks like your rifle is capable of shooting quite accurately. Remember those things I told you about in the PM? I believe that is where the problem lies. You also might want to look into getting a target that allows you to better center your cross hairs. I would bet that with the scope you are using, your cross hairs kind of cover up those lines. A fairly large white circle surrounded by a heavy black outer ring better allows you to center your cross hair. Believe me, years of shooting Hunter Class benchrest with a 6x scope proved that to me.
Richard
|
|
|
|
Post by deadon on Nov 1, 2010 16:08:14 GMT -5
Rusty...........it looks like your rifle is capable of shooting quite accurately. Remember those things I told you about in the PM? I believe that is where the problem lies. You also might want to look into getting a target that allows you to better center your cross hairs. I would bet that with the scope you are using, your cross hairs kind of cover up those lines. A fairly large white circle surrounded by a heavy black outer ring better allows you to center your cross hair. Believe me, years of shooting Hunter Class benchrest with a 6x scope proved that to me. Richard When shooting my 6.5 x 284 I used to draw a half inch dot in the center of the plate. I had a nicon Buckmaster 6 X 18 IIRC .Do you think the dot would be better? On my ml11 I have a vortex 4 x 12 and you are right, The fine line in the center of the cross hair alllllmost covers up the cross on my target. Thanks again, Rusty |
|
|
|
Post by Chris Champion on Nov 2, 2010 16:10:11 GMT -5
Rusty,
Have you tried the non-crush rib version? If not give em a try. They might tighten things up a little.
|
|
|
|
Post by mike3132 on Nov 2, 2010 16:36:03 GMT -5
|
|
|
|
Post by deadon on Nov 2, 2010 17:35:01 GMT -5
Rusty, Have you tried the non-crush rib version? If not give em a try. They might tighten things up a little. I have been unable to find the smooth sabot but have tried a few that boarhog sent me,. I am saving the rest to try when the CR shoots really good. Thanks, Rusty |
|
|
|
Post by deadon on Nov 2, 2010 17:36:06 GMT -5
|
|
|
|
Post by tar12 on Nov 3, 2010 5:21:51 GMT -5
Rusty, Have you tried the non-crush rib version? If not give em a try. They might tighten things up a little. I have been unable to find the smooth sabot but have tried a few that boarhog sent me,. I am saving the rest to try when the CR shoots really good. Thanks, Rusty Mid-South has them in stock. |
|
