|
|
Post by gunny on Oct 2, 2010 14:36:30 GMT -5
Does anyone know what the thread pitch is on the new hex breech plug? I had Possum Hollow make me a bore guide just got it and won,t thread in. Called Eric and he said he did 1in 16 pitch. Does anyone know if that is still the pitch? Thanks for your time. Don
|
|
|
|
Post by rossman40 on Oct 2, 2010 16:33:54 GMT -5
It's 16 pitch but 11/16". If you bought one from me it would have worked ;D ;D
|
|
|
|
Post by Jon on Oct 2, 2010 16:51:47 GMT -5
Listen to Rossman his work is tops and you can't beat the price.
Jon
|
|
|
|
Post by gunny on Oct 2, 2010 17:27:23 GMT -5
Rossman, Rossman,Rossman I may purchase from you yet ;D I ordered it prior to seeing your post in tools and gear. Will you PM me on how to order. Thanks Don
|
|
|
|
Post by tdillinger on Oct 3, 2010 8:52:31 GMT -5
It's 16 pitch but 11/16". If you bought one from me it would have worked ;D ;D Rossman40 what are the differences between your breech plugs vs savage? |
|
|
|
Post by rossman40 on Oct 3, 2010 14:50:55 GMT -5
I'm not quite to doing breech plugs yet. I was lining up the capabilities to harden them after milling but now you can buy a hex head from the factory fairly cheap. I can do a drill bushing conversion. I have became quite familiar with the Savage breech plug threads doing the bore guides. It isn't standard thread dimensions, the major dimension is close, the minor dimension isn't standard. So if by chance you buy a die and think you are going to chase your breech plug threads, it wouldn't work.
|
|
