Lehigh conversion update

[grouse]

The Version II plugs are done and have been tested by me. I will be mailing out a couple plugs to Mike and Jim to confirm my testing. If they see the same results as me, Lehigh will mail out the new plugs to those that purchased Version one asap.



*****Please check the web-site before ordering any new plugs to make sure it fits your current Knight Extreme/Elite Muzzleloader.*****



I also want to note a Knight Vision plug has been made for BH209. I will test that plug this weekend.

[mike.dawson]

Thanks Grouse, I did put a Viton O ring in Version #1 and it really helped with the leakage. I cant wait to give it a go. Did they make them primer specific? I have had email conversation with Dave, the Viton O ring in my Knight Lehigh BP NOW has over 100 shots on it as well as soaking it in Hoppes#9, removal and reinstalling it in the primer cup and it still is fine and still seals the cup. For those that want to seal up version #1, I found the Viton O rings at Harbor Freight tools

Mike

[robnj]

grouse: Thanks for the update ! My version I plug is working fine now..after sabotloader machined out the adapter a bit. I will need 2 more. One for each Elite.

Mike: Is there a stock number for the O-ring from Harbor Freight ?

Thanks... Rob

[mike.dawson]

It comes in a kit with a bunch of rings that cant be used for anything I know but there are about 30 in the box that will work, cost about 18.00. This is the link for the Viton O ring assortment

www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=67525
Mike