|
Post by wk4036 on Jan 10, 2010 9:12:35 GMT -5
Hi Guy's, I am gathering parts to do an inline build with a 98 mauser action and have two questions at this time. 1) Does anyone know where I can get a stock without the magazine cutout? 2) I would like to go 45 cal but with what I have been reading the supply of 45 cal sabots is kinda slim compared to 50 cal and from what I can see getting a round 45 cal barrel is easier than a 50 cal?. I am open to an suggestions so fire away. Thanks
|
|
|
Post by whyohe on Jan 10, 2010 18:27:48 GMT -5
is this going to be a BP and/ or subs gun? if you want a stock try richards microfit or boyds gun stocks.
|
|
|
Post by wk4036 on Jan 10, 2010 20:13:54 GMT -5
Being from Michigan it must be Bp or substitute
|
|
|
Post by Al on Jan 11, 2010 4:04:40 GMT -5
let me check with our local Mauser guru later today.
Personally, I'd set it up for smokless.
|
|
|
Post by wk4036 on Jan 11, 2010 4:45:47 GMT -5
What are the differences between a BP and smokeless gun besides powder?
|
|
|
Post by blackhawk7204 on Jan 11, 2010 8:39:43 GMT -5
Barrel steel, breach plug design and a completely sealed ignition system. Much cleaner and cheaper to shoot, faster bullet speed and lower recoil.
|
|
|
Post by wk4036 on Jan 11, 2010 9:07:50 GMT -5
Can the smokeless breech plug design be carried over to the BP rifle?
|
|
|
Post by Al on Jan 11, 2010 13:51:39 GMT -5
|
|
|
Post by wk4036 on Jan 11, 2010 14:36:22 GMT -5
Al, Thanks for the link, that just might work. Frank
|
|