|
Post by jims on Nov 20, 2023 18:24:19 GMT -5
I have a Ruger No. 1. Worked when I cleaned and put it away last year. Today I went to load it and the safety will not slide to fire or safe and when I try to open the breech the under lever will only go down slightly thus it does not open to load. Thoughts? Thanks
|
|
|
Post by jims on Nov 22, 2023 21:06:48 GMT -5
I put the smallest amount of Break Free on it and after two days I was able to get it to open. Plan to clean the exposed areas and very slightly lubricate it or put Never seize on the problem areas. I think that will cure the problem.
|
|
|
Post by alexcray on Feb 28, 2024 21:41:09 GMT -5
I put the smallest amount of Break Free on it and after two days I was able to get it to open. Plan to clean the exposed areas and very slightly lubricate it or put Never seize on the problem areas. I think that will cure the problem. Internal parts like springs, pins, or levers could be worn, broken, or misaligned, causing the malfunction.
|
|