|
Post by rjhans53 on Aug 2, 2009 14:03:48 GMT -5
I've been having some issues with the NFPJ conversion in that after a few shots (sometimes as few as 2) the spent primer sticks and does not want to fall out. This leads to everything from rapping the bolt on the top of the shooting table to pulling the bolt to remove and wipe down the primer holder) I maybe have come up with a decent (not perfect) solution. The last 2 range trips I've went with the 209 holder and face of the bolt waxed with paste car wax. This adds about 2 min to cleaning and although the primer gets to where it doesn't just fall out, it falls out by lightly shaking the bolt. Yesterdays range sesion was 14 rounds of t7 and this morning was 6 BH209 and 8 or so of t7.
|
|
|
Post by grouse on Aug 2, 2009 17:21:09 GMT -5
That's exactly why i quit using it. The blow back really dirties that area up. I hope to have a solution for that in the near future.
|
|