|
Post by lindauer on Feb 7, 2019 17:48:55 GMT -5
Do you guys lube the bullet when smooth size forming .452 bullets? And if so what lune do you guys prefer?
|
|
|
Post by 12ptdroptine on Feb 7, 2019 17:52:25 GMT -5
I prefer Castrol stick wax first then Aalox bullet lube. Some say no...But I still do. When do e sizi g I make SEUR wthey dont pick up any debris. Then I wash them with a Tshirt rag and Isopropyl alcohol. Drop
|
|
oked
8 Pointer
Posts: 206
|
Post by oked on Feb 7, 2019 19:12:49 GMT -5
Don't use any. Works good.
|
|
|
Post by thelongrider on Feb 8, 2019 8:37:07 GMT -5
Hornady Case lube works for me, also the imperial sizing wax is about as good as any.
|
|
|
Post by jims on Feb 8, 2019 9:47:46 GMT -5
I lube the bullets just to be safe. I suspect I could size them slightly without but just have not wanted to chance it. May try that in the future.
|
|
|
Post by edge on Feb 8, 2019 10:01:43 GMT -5
The downside to lube is junk sticking to them, I clean after sizing.
edge.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 8, 2019 10:08:41 GMT -5
I do not lube, but clean my die every so often and use clear kiwi with a Q tip to coat the inside of the die.
|
|
|
Post by AJ on Feb 8, 2019 11:34:53 GMT -5
I lube the bullets for all sizing FF and smooth. Hopefully it makes the die last a bit longer since grease (or wax in this instance) is cheaper than steel.
|
|
|
Post by rambler on Feb 8, 2019 12:05:35 GMT -5
I had Dennis with Fury bullets tell me to always use lube with any sizing die. So that's what I do. He gave me the recipe for home made lube. 80% pure lanolin and 20% castor oil. Both available at Wal Mart. I got enough to last forever.
|
|
|
Post by Dave W on Feb 8, 2019 12:52:11 GMT -5
Always lube with stick wax, Dennis at Fury and pretty sure Swinglock recommends it as well.
|
|