|
Post by overtheir on Nov 27, 2017 20:34:36 GMT -5
Ok guys I got a 308 that I have removed the barrel and got the bolt nose and lukes new plug to install on my back up barrel that is a savage model 1011 anyway that went smooth got the barrel of and put the bolt nose on closed the bolt and proceed to screw in the barrel it touch and i backed off a little maybe 1/16 of a turn finger tighten the nut and dried fire the new toy ,everything went bang or click safety works great but when I put it back in the factory stock nothing happens I relize the barrel is larger in dia. but the trigger assembly fits not bad any ideas .Also can the orginal stock be used if I relieve the places it touchs sort of free floating shall we say . Thanks Mario
|
|
|
Post by dannoboone on Nov 28, 2017 11:22:58 GMT -5
You do need to free float the barrel. Not familiar with the stock on a factory Mod 11...synthetic? If so, you probably need to get a different stock, or open yours up for free floating and do some reinforcement to the forearm area.
|
|