|
Post by jsthntn247 on Oct 30, 2014 15:48:30 GMT -5
What die setting on the swinglock are most of yall using with land riders. I'm about to go home and try my luck with sizing for the first time and have no idea where to start. I have some .452 300gr xtp to practice with and some .451 300gr Be's to hunt with. Will the die use a different setting for each. I also saw where some lube their wad. I've never seen anyone say with what or if it was necessary?
|
|
|
Post by lwh723 on Oct 30, 2014 15:51:04 GMT -5
Every die and barrel is different. Start at 0 and adjust very, very slowly. One little tick mark at a time!
|
|
|
Post by vpimine on Oct 31, 2014 11:18:10 GMT -5
Yes, you will find that the different bullets will have a different setting... On my Apex.. I am sizing 250BE and 275MH and they are close to the same but I have to size the BE small to get a consistent loading pressure than I do the 275 MH..
|
|
|
Post by jsthntn247 on Nov 1, 2014 13:12:27 GMT -5
Man these suckers size easy. By the time I could feel anything the first bullet measured .4485. Whoops
|
|
|
Post by Richard on Nov 1, 2014 13:15:41 GMT -5
Knurl it up, change your setting and size again! Richard
|
|