|
Post by dirtboy on Sept 17, 2014 10:37:39 GMT -5
|
|
|
Post by rangeball on Sept 17, 2014 10:50:26 GMT -5
Knurl the barnes a bit for a better sabot fit. They are a thousandth or so smaller than the sst.
|
|
|
Post by rambler on Sept 17, 2014 10:57:27 GMT -5
Nice shooting dirtboy
|
|
|
Post by dirtboy on Sept 17, 2014 11:54:51 GMT -5
I put a knurl on the 200sst and the last 195 bx I shot I put a knurl on those as well. This group is under a inch and the 195 bx are around 2 inches. Still a whole lot better than my old muzzle loader. I notice when I knurl the sst I dont have to apply alot of pressure to knurl the entire flat side of the bullet but when i do the bx i have to apply alot of pressure to get the knurl to cover the entire flat side of the bullet if not then the center section is still smooth any body else notice this. Also with the bx i have not shot 62 gr of 4198.I started at 58 and worked up to 61 and it has gotten better. If I get a chance over the weekend I will try some more. Also I have wind flags that I watch so those shots are zero wind or very light breeze. Thanks
|
|
|
Post by rambler on Sept 17, 2014 11:57:59 GMT -5
Have you considered trying sabotless?
|
|
|
Post by dirtboy on Sept 17, 2014 12:19:55 GMT -5
Thats going to be next years project. Or when ever I get my fun money together. I seem to be getting less of that these days.
|
|