Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 4, 2014 17:54:14 GMT -5
WELL I FOUND A GUNSMITH HERE IN INDIANA THAT I WAS LOOKING FOR AND TOOK THE KNIGHT DOWN TO HIM AND HE SHORTENED THE BARREL TO 251/2 INCHES.HE DID IT WHILE I WAS THERE AND WAITED FOR IT. HIS IDEA.AND HE RECROWNED THE BARREL.NOW,DID I DO ANYTHING WRONG AND HOW MUCH VELOCITY AND ACCURACY WILL I LOSE? IT SURE FEELS BETTER AND HANDLES GREAT.
|
|
|
|
Post by jims on Aug 5, 2014 11:46:34 GMT -5
I do not know how long the barrel was to start but that length is still more than adequate. Should not be a problem there. Accuracy should not be an issue as long as the crown work was done well.
Just shoot it and find out, you might be pleasantly surprised.
|
|
gregk
8 Pointer
Posts: 159
|
Post by gregk on Aug 6, 2014 20:06:00 GMT -5
You will be fine & the gun shouldn't suffer at all.
|
|
|
|
Post by artjr338wm on Aug 14, 2014 20:07:08 GMT -5
Would you mind listing your gunsmiths contact information, one never knows when you may need a good smiths services
Art
|
|
