|
Post by zakjak221 on Nov 24, 2009 15:07:53 GMT -5
Read the instructions guys, but when I get the blue box after selecting IMG image, I click copy then go to attachment & never get the paste prompt to come up. Any suggestions/help appreciated.
Mark
|
|
|
Post by ozark on Nov 24, 2009 16:04:27 GMT -5
After you right click in the blue box, go to Dougs message board and select the place you want to post the picture. Move curser to the body where you would type and right click. A popup will appear with the word paste, plus other options. Click paste and the image code will appear. when you use post reply it will appear as a picture on Dougs board. Let me follow my own instructions here to see if it works:
|
|
|
Post by ozark on Nov 24, 2009 16:05:09 GMT -5
It worked for me. Good luck
|
|
|
Post by whyohe on Nov 25, 2009 6:10:52 GMT -5
zakjak221, you MUST move the curser over the blue box and then right click and choose copy. if you dont and leave the curser to the side, the blue high light goes away and you have just choosen nothing. if you are still havong a problem PM me and I will help you!
|
|
|
Post by petev on Nov 27, 2009 23:57:20 GMT -5
I also read the instructions, and do a left click on the IMG code box, then a right click ,and click copy on the menu, and then hit paste in the text of my post, and nothing. I have to admit that I don't know what it means to put the cursor inbetween IMG code and the box. The IMG code is in the box, isn't it? If I put the cursor on the IMG code, it lights blue, and then right click and there is the menu with copy on it, but it doesn't work. Help!
|
|
|
Post by petev on Nov 28, 2009 0:03:13 GMT -5
I think I just found out what the problem was. It seems that between step 1 and 2, you have to select the picture, and then copy the IMG code off that, not off the picture when it is just in the album, if that makes sense.
|
|
|
Post by zakjak221 on Nov 28, 2009 0:19:57 GMT -5
petev,
I got it figured out too, after Ozark's help. I was trying to put the picture in the attatchment box?
Mark
|
|
|
Post by petev on Nov 28, 2009 0:24:40 GMT -5
I just tried something that might help picture posting go a little faster for folks. You can open Word, and type in your post, then copy the image (s) from Photobucket and paste them in the Word document. Then, when you are ready to post, just do a left click drag on all the document, then it will be highlighted. Right click, copy, and paste the whole thing into the Doug's Board post. This is if you are unable to keep both the Photobucket and Dougs windows open at the same time (since you should be able to keep both Dougs and Word open at the same time).
|
|