|
Help
Aug 26, 2020 21:00:36 GMT -5
via mobile
Post by sdavis167 on Aug 26, 2020 21:00:36 GMT -5
I've got a ss 10ml 2 breech plug stuck.And the ramrod is missing the guy I got it off of does not know if it is loaded.How can I tell if it is loaded first then best way toget breech plug out.
|
|
|
Help
Aug 27, 2020 0:20:17 GMT -5
Post by ET on Aug 27, 2020 0:20:17 GMT -5
I've got a ss 10ml 2 breech plug stuck.And the ramrod is missing the guy I got it off of does not know if it is loaded.How can I tell if it is loaded first then best way toget breech plug out. To start with a standard 10ML-II barrel with breech plug installed has a bore depth of 22". A measurement of bore depth will tell you what you need to know. And for goodness sake don't use a steel rod for checking bore depth on a stainless barrel. Would you happen to know what powder he was using?
|
|
|
Help
Aug 27, 2020 10:46:09 GMT -5
Post by edge on Aug 27, 2020 10:46:09 GMT -5
Remove the bolt and then hold it up to a light and you should see light through the barrel.
|
|
|
Help
Aug 27, 2020 19:59:48 GMT -5
Post by billc on Aug 27, 2020 19:59:48 GMT -5
Any insights to how the BP is stuck? It would help with suggestions -- ie is it cross threaded, rusted, was never seize or teflon tape used on the threads?
|
|