Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2020 18:19:12 GMT -5
I have a knight/brux sml that I shoot 200 grain sst with hlbs.I would like to try to shoot sabotless bulleys,but I know the information would be to get either a full form or smooth form die.Being on a fixed income I can not go in either of those directions.SO,are there any bullets out there that can be shot from package to the bore sabotless?I shoot h4198 powder at 60 grains.Appreicate any information on this matter.
|
|
|
Post by billc on Feb 18, 2020 21:01:06 GMT -5
I would start by determining the exact size of your bore. Then see what the various bullet makers have available or if they would size a batch for you. Another option could be have Lee make you a custom bullet sizing die, I think the last sizing die they made for me was $32. I really like my Swinglok die and wouldn't step away from it, but if I was in a crunch I might try the Lee.
|
|
|
Post by buckstuds on Feb 19, 2020 13:24:19 GMT -5
I have a omega/brux combo. I use a lee 449 die with a 250sst. I run the bullets thru three times on a fouled bore. Our barrels should be close to each other. About as cheap as you can go.
|
|