|
Rings
Oct 15, 2019 13:25:52 GMT -5
via mobile
Post by bowhunter4life on Oct 15, 2019 13:25:52 GMT -5
What rings would you recommend for arrowhead encore barrel? I just bought a Leupold VX-5HD for it and need rings! Would the DNZ rings hold up? Barrel has a brake on it! It has a steel base on it but would remove it if the dnz would work! Also what wrench do you guys recommend for torquing the screws to correct specs
|
|
|
Rings
Oct 15, 2019 18:58:18 GMT -5
Post by kbrezlin on Oct 15, 2019 18:58:18 GMT -5
I have only been using Badger Ordnance rings lately. I have also really like Ken Farrell. Also only been using steel rings. I have a snap on 0-25 inch lbs dial torque wrench for the caps and a 0-100 inch ponund torque wrench for the cross bolts and action screws.
|
|
|
Rings
Oct 15, 2019 19:50:03 GMT -5
Post by rambler on Oct 15, 2019 19:50:03 GMT -5
|
|
|
Rings
Oct 15, 2019 21:00:08 GMT -5
via mobile
Post by joelmoney on Oct 15, 2019 21:00:08 GMT -5
That is what I have been using lately Rambler. I like it a lot!
|
|
|
Rings
Oct 15, 2019 23:58:25 GMT -5
via mobile
Post by olegburn on Oct 15, 2019 23:58:25 GMT -5
DNZ are great one piece ring/ base. Light sturdy and never moved on my ML2. I glass bedded it because receiver was not exactly even. It also machined very precise and doesn't mark scopes
|
|
|
Rings
Oct 16, 2019 5:04:34 GMT -5
Post by hatchetjack1 on Oct 16, 2019 5:04:34 GMT -5
I am a fan of the Talley one piece for all my Encore barrels. They have never let me down and they look great.
|
|
|
Rings
Oct 16, 2019 13:18:07 GMT -5
via mobile
Post by bowhunter4life on Oct 16, 2019 13:18:07 GMT -5
|
|
|
Rings
Oct 16, 2019 13:44:38 GMT -5
Post by rambler on Oct 16, 2019 13:44:38 GMT -5
The highest setting will go just over 65 inch pounds which is perfect for the bolts that hold the rings to the base.
|
|
|
Rings
Oct 19, 2019 16:01:12 GMT -5
Post by Boonechaser on Oct 19, 2019 16:01:12 GMT -5
I have only been using Badger Ordnance rings lately. I have also really like Ken Farrell. Also only been using steel rings. I have a snap on 0-25 inch lbs dial torque wrench for the caps and a 0-100 inch ponund torque wrench for the cross bolts and action screws. X2
|
|
|
Rings
Oct 19, 2019 16:02:41 GMT -5
Post by Boonechaser on Oct 19, 2019 16:02:41 GMT -5
The highest setting will go just over 65 inch pounds which is perfect for the bolts that hold the rings to the base. Great product, came in a Wheeler scope mount kit that I bought about 5 yrs ago. Works great!
|
|
|
Rings
Oct 19, 2019 16:15:37 GMT -5
Post by GMB54-120 on Oct 19, 2019 16:15:37 GMT -5
|
|
|
Rings
Oct 19, 2019 16:18:37 GMT -5
Post by rambler on Oct 19, 2019 16:18:37 GMT -5
That's a really good deal! Amazon has it for the same price and free shipping.
|
|