|
Post by ET on Oct 2, 2019 16:48:44 GMT -5
The stage is now set for the testing I intend to do. The standard BP arrived recently, compliments of billc. It’s now been conditioned to fit my 10ML-II. Now I’ve been searching for my 3/8” recessed BP but only found 2-5/16” recessed BP’s. Okay a 5/16” has been altered to 3/8” to complete the set I want to employ for testing. And yes, both recessed BP’s have been done with drill tips ground to 82-degrees. As for my memory I think it sometimes is having an out of body experience (not connected), chuckle. Anyway, the BP’s are ready to Rumba and from test results I can determine the best suited dance partner (powder) for each one. In theory by altering the volumetric confinement I believe this also alters the intensity of the burn start. Results will reveal if my theory is sound or if I’m full of you know what, chuckle. Now what I need is range time that seems to be hard to schedule. Ed
|
|
|
Post by billc on Oct 2, 2019 18:29:04 GMT -5
Looks like you are set to make some traces. Good luck, can't wait to see the results.
|
|
|
Post by jims on Oct 2, 2019 19:18:15 GMT -5
Interested also.
|
|
|
Post by ET on Oct 2, 2019 19:36:20 GMT -5
Looks like you are set to make some traces. Good luck, can't wait to see the results. You're not the only one that's anxious to see results. Wish there was some way to speed up the process. Then there's 2-other powders scheduled for testing. No shortage of needed range visits for a while, chuckle.
|
|