Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 21, 2018 19:59:34 GMT -5
New guy here.....Some of my centerfire shooting buddies told me about a product called Wipeout to clean there rifles. They claim it's pretty awesome stuff. I shoot BH209 and have been using Hoppe's on my muzzle loader and although it works fine, they claim Wipeout would work better to quickly remove fouling. Anybody use this stuff??
|
|
|
|
Post by AJ on Oct 22, 2018 5:50:13 GMT -5
I have used it for years in CF and it works great. You quickly know if your barrel has copper fouling as it turns blue. I spray the bore with the expanding foam and leave it sit for 30 min then patch it out. If it is a very fouled bore I will also spray and leave it sit overnight. Occasionally a second or third session is needed. I have not used it for plastic sabot fouling though.
|
|
|
|
Post by Dave W on Oct 22, 2018 7:10:45 GMT -5
AJ nailed it. Great cleaner.
|
|
|
|
Post by mtdjager on Dec 21, 2018 15:16:45 GMT -5
|
|
|
|
Post by mtdjager on Dec 21, 2018 15:24:32 GMT -5
I've probably tired 75-80% of every bore cleaner you can buy and none I tried worked better and very few as good as Shooters Choice Wipe-out foaming bore cleaner.
It's one and only draw back and it only matters if you are the type who demand things be done yesterday is Wipe-Out is slower than other bore cleaners.
But it more than makes up for it's, IMHO only shortcoming by the considerable amount of money you will save in using 75-80%+ fewer bore patches and at least a 75% less effort needed to clean the bore.
I just cleaned my 300 wsm after at least 35-40 rounds and I used less than 14 patches total from beginning to back in the gun safe.
I spray it in till the fosm comes out both ends of a level barrel, plug both ends of barrel, let soak 1-2hrs, push 3-5 patches down bore, if not satisfied apply again let soak 1-2 more hours, 3-6 patches and for 90% plus of my rifles that's all it usually takes to get a almost perfectly white patch by the 10th or 12th one. If I have the time I do only one application and let sit for 4-6 hours then I use even fewer patches.
I especially love the fact Wipe-Out nearly eliminates the potential for damage to your bore or the crown of your muzzle from cleaning because instead of dozens or hundreds of passes up and down your bore with other bore cleaners, Wipe-Out you usually only make less than a dozen per cleaning. |
|
|
|
Post by frontiergander on Feb 19, 2019 23:57:57 GMT -5
Wipeout and Accelerator are excellent products.
|
|
