|
powders
Sept 24, 2017 16:38:06 GMT -5
via mobile
Post by changinglives on Sept 24, 2017 16:38:06 GMT -5
just got my barrel conversion back from pr bullet in .45 what is a good sabot load. I have 4350 in stock and titegroup pistol powder (not sure if it has any use as a booster in a duplex) I am reading alot of good results with IMR4198
|
|
|
powders
Sept 25, 2017 12:18:51 GMT -5
Post by dannoboone on Sept 25, 2017 12:18:51 GMT -5
Whether or not you can safely duplex depends on the type of ignition system you have. Do you have PR's LRMP plug with the vent screw? Tightgroup is probably too fast for a booster, and will eat up the vent screw hole. Harvester Blue sabots usually fair the best as far as sabots go, but you need cooling time and/or a cooling rod between each shot so the sabot will not get warm and soft, resulting in poor accuracy. What bullet do you plan to shoot? To find proven loads, go here: app.box.com/s/7u86evwrvgn3wmxpdzndtnzjcr04dfv2The listed loads for 195-200gr bullets are sabot loads. P.S. Just noticed this is your first post...... Welcome to the board!
|
|