|
Post by kennacl55 on Aug 22, 2017 20:46:26 GMT -5
I got a new string and cable for my old ten point blaser HP. I checked my axle to axle before I removed the old string and cable and it measured 5/8 inch longer than it should have been. My question is what controls the axle to axle measurement ?
|
|
|
Post by gar on Aug 23, 2017 4:37:13 GMT -5
The length of the cables. When cables stretch, they allow the cams to over rotate and the axles become farther apart. New strings should get the performance and the balance of the cams back to snuff.
|
|
|
Post by Dave W on Aug 23, 2017 17:56:43 GMT -5
The length of the cables. When cables stretch, they allow the cams to over rotate and the axles become farther apart. New strings should get the performance and the balance of the cams back to snuff. He nailed it Kenny.
|
|